Title: Longer blade plug Post by: Cochran1977 on January 04, 2019, 01:52:56 AM Just wondering if it is possible to get longer blade plugs. The ones that came with my ?5 sentinel and apprentice are 3/4” too short to cover the windows (top of plug shows in windows).
Title: Re: Longer blade plug Post by: Therion Jinn on January 04, 2019, 03:57:43 AM As of right now, They only make one length of blade plug that I am aware of.
To get longer ones, you'd likely need to see about making them yourself, or having them made Title: Re: Longer blade plug Post by: Son_Of_A_Sith on January 06, 2019, 01:31:29 AM Yes I bought a grab bad blade just to cut down to fit in each one of my sabers perfectly.. making them isn't too difficult.
Title: Re: Longer blade plug Post by: deevee2 on January 05, 2019, 07:23:16 PM Yes I bought a grab bad blade just to cut down to fit in each one of my sabers perfectly.. making them isn't too difficult. that's probably one of the more cost effective methods too Title: Re: Longer blade plug Post by: Son_Of_A_Sith on January 06, 2019, 02:48:34 AM that's probably one of the more cost effective methods too Definitely! Title: Re: Longer blade plug Post by: BatMike90 on January 08, 2019, 12:08:56 PM Yes I bought a grab bad blade just to cut down to fit in each one of my sabers perfectly.. making them isn't too difficult. I recommend this method because blade plugs in the secondary market are very expensive. Title: Re: Longer blade plug Post by: chalion on January 09, 2019, 12:50:54 AM Clear 1" OD polycarbonite tubing isn't that expensive and lots of online retailers sell it. You can easily cut it to size with a pipe cutter and pvc glue works on it, but there's many other adhesives that are cheap and easily accessible. I have a few tubes of poly I was trying to use to make a chassis for my 18650 batteries since they fit it quite well.
|