gbr1976
Knight Apprentice
Force Alignment: 3
Posts: 39
|
|
« on: June 19, 2015, 05:05:24 AM » |
|
Hey all,
I've been fiddling with my Bellicose with Sound Emerald and have noticed something...odd. I went with the illuminated AV switch in red, and it seems to be dim when the saber is powered on, but when I activate the FOC, it strobes to a very bright red. Is this something I can change with the Emerald settings, or is it normal? My other two sabers with illuminated AV switches don't have this issue.
Any thoughts?
|
|
|
Logged
|
|
|
|
|
Groovidad
Knight Commander
Force Alignment: -203
Posts: 997
Darth Groove
|
|
« Reply #1 on: June 19, 2015, 05:19:26 AM » |
|
Hey all,
I've been fiddling with my Bellicose with Sound Emerald and have noticed something...odd. I went with the illuminated AV switch in red, and it seems to be dim when the saber is powered on, but when I activate the FOC, it strobes to a very bright red. Is this something I can change with the Emerald settings, or is it normal? My other two sabers with illuminated AV switches don't have this issue.
Any thoughts?
It sounds like you configured your saber AV switch in series with your blade. Go back and look "how" you configured your AV switch. If your FoC is different color than blade, your AV will be at full brighteness. Yet, when using your main blade color, dimmer or pulsing.
|
|
|
Logged
|
Failure is NOT an option! ARSENAL Dark Initiate LE v3; BR w/VA FoC; OBS v4 Chosen One CE; BR w/AS FoC; AV red; OBS v4 Dominix LE v3; VA W/AB FoC, AV red, OBS v4 Dark Liberator v3; FO, OBS v3 Guardian CE; Emerald, Black AV yellow, OBS v4 Sentinel v4, Windows, SRD w/AB FoC, Silver AV blue, OBS v4 Graflex SE, Emerald, silver AV, Brass buttons, OBS v3 Prophecy, GB blade, OBS v3, Silver AV Standard Issue BS, GB w/VA FoC, Silver AV Green, OBS v3 Crimson Reaper, Emerald, Silver AV Blue, OBS v3, recharge port Crimson Liberator, Stunt Archon v2.1; CG w/AS FoC, AV Blue, OBS v4
|
|
|
|
gbr1976
Knight Apprentice
Force Alignment: 3
Posts: 39
|
|
« Reply #2 on: June 21, 2015, 07:37:48 PM » |
|
Hmm...I'll have to look into that. Not sure I remember changing anything with the switch. I didn't think that could be changed from what I read.
|
|
|
Logged
|
|
|
|
|
Groovidad
Knight Commander
Force Alignment: -203
Posts: 997
Darth Groove
|
|
« Reply #3 on: June 21, 2015, 11:17:32 PM » |
|
Hmm...I'll have to look into that. Not sure I remember changing anything with the switch. I didn't think that could be changed from what I read.
Brother, if you have a 4-Channel Emerald, you had choices on how to configure the AV switch: same as blade color, in series with one channel or 1 channel strictly dedicated to the switch. Go back to "Your Account", log in and look at your purchase history. It will tell you exactly how it's configured.
|
|
|
Logged
|
Failure is NOT an option! ARSENAL Dark Initiate LE v3; BR w/VA FoC; OBS v4 Chosen One CE; BR w/AS FoC; AV red; OBS v4 Dominix LE v3; VA W/AB FoC, AV red, OBS v4 Dark Liberator v3; FO, OBS v3 Guardian CE; Emerald, Black AV yellow, OBS v4 Sentinel v4, Windows, SRD w/AB FoC, Silver AV blue, OBS v4 Graflex SE, Emerald, silver AV, Brass buttons, OBS v3 Prophecy, GB blade, OBS v3, Silver AV Standard Issue BS, GB w/VA FoC, Silver AV Green, OBS v3 Crimson Reaper, Emerald, Silver AV Blue, OBS v3, recharge port Crimson Liberator, Stunt Archon v2.1; CG w/AS FoC, AV Blue, OBS v4
|
|
|
|
gbr1976
Knight Apprentice
Force Alignment: 3
Posts: 39
|
|
« Reply #4 on: June 28, 2015, 05:25:41 PM » |
|
I didn't even think to check my purchase history. Thanks! Got it sussed to where I like the saber. Appreciate the advice!
|
|
|
Logged
|
|
|
|
|
Racona Nova
Knight of the Obsidian Order
Moderator
Knight Commander
Force Alignment: 1116
Posts: 4771
There is no good or evil....there's only power!
|
|
« Reply #5 on: June 28, 2015, 06:22:23 PM » |
|
Yes, it seems that your switch has been configured "in series". When you make changes to the channel the switch is in series with, then you will change its brightness and behaviour. It looks like the switch is in series with the channel that is currently used for FoC because your switch is at high brightness when it's activated. In Pulse/Idle Mode you have reduced the power to this channel, that's why the switch is dim during that time. The only thing that is constant is the switch LED colour - this can't be changed through the Driver, only by swapping the whole switch! I think that's what you've read, right? I assume your other sabers are non-Emerald? Then these switches wouldn't show this behaviour at all, because it's only available with an Emerald saber. @Groov: the third option is "Always On", actually - "same as blade colour" wouldn't make sense on an Emerald saber and, as I said, it's not even possible to control the colour with the Driver
|
|
« Last Edit: June 28, 2015, 06:25:56 PM by Racona Nova »
|
Logged
|
Sig by Master Nero Phantasm v3 LE (Obs v3) - AB w/ FoC AS---Manticore (Obs v3) - BR w/ FoC AS (QD)---Archon v2.1 (Obs v3) - RGBW Emerald
|
|
|
|
Groovidad
Knight Commander
Force Alignment: -203
Posts: 997
Darth Groove
|
|
« Reply #6 on: June 28, 2015, 06:29:05 PM » |
|
@Groov: the third option is "Always On", actually - "same as blade colour" wouldn't make sense on an Emerald saber and, as I said, it's not even possible to control the colour with the Driver Yes, I realize, just didn't mention it as this was not salient to his issue.
|
|
|
Logged
|
Failure is NOT an option! ARSENAL Dark Initiate LE v3; BR w/VA FoC; OBS v4 Chosen One CE; BR w/AS FoC; AV red; OBS v4 Dominix LE v3; VA W/AB FoC, AV red, OBS v4 Dark Liberator v3; FO, OBS v3 Guardian CE; Emerald, Black AV yellow, OBS v4 Sentinel v4, Windows, SRD w/AB FoC, Silver AV blue, OBS v4 Graflex SE, Emerald, silver AV, Brass buttons, OBS v3 Prophecy, GB blade, OBS v3, Silver AV Standard Issue BS, GB w/VA FoC, Silver AV Green, OBS v3 Crimson Reaper, Emerald, Silver AV Blue, OBS v3, recharge port Crimson Liberator, Stunt Archon v2.1; CG w/AS FoC, AV Blue, OBS v4
|
|
|
|
Racona Nova
Knight of the Obsidian Order
Moderator
Knight Commander
Force Alignment: 1116
Posts: 4771
There is no good or evil....there's only power!
|
|
« Reply #7 on: June 28, 2015, 06:37:51 PM » |
|
I know, just wanted to correct that...I'm sorry, but I'm always doing this - it's a part of me If it's annoying, I apologize and I'll try to keep me from doing that too much
|
|
|
Logged
|
Sig by Master Nero Phantasm v3 LE (Obs v3) - AB w/ FoC AS---Manticore (Obs v3) - BR w/ FoC AS (QD)---Archon v2.1 (Obs v3) - RGBW Emerald
|
|
|
|
gbr1976
Knight Apprentice
Force Alignment: 3
Posts: 39
|
|
« Reply #8 on: July 01, 2015, 04:15:34 AM » |
|
Thanks for all the suggestions and tips, guys. Really love the Emerald saber. I'll have to get some pics posted.
|
|
|
Logged
|
|
|
|
|
Groovidad
Knight Commander
Force Alignment: -203
Posts: 997
Darth Groove
|
|
« Reply #9 on: July 01, 2015, 07:04:52 AM » |
|
I know, just wanted to correct that...I'm sorry, but I'm always doing this - it's a part of me If it's annoying, I apologize and I'll try to keep me from doing that too much Not at all, brother! Your vast insightfulness only adds to the conversation. It brings more into focus! Thanks so much for your input! After all...we are a collective!
|
|
|
Logged
|
Failure is NOT an option! ARSENAL Dark Initiate LE v3; BR w/VA FoC; OBS v4 Chosen One CE; BR w/AS FoC; AV red; OBS v4 Dominix LE v3; VA W/AB FoC, AV red, OBS v4 Dark Liberator v3; FO, OBS v3 Guardian CE; Emerald, Black AV yellow, OBS v4 Sentinel v4, Windows, SRD w/AB FoC, Silver AV blue, OBS v4 Graflex SE, Emerald, silver AV, Brass buttons, OBS v3 Prophecy, GB blade, OBS v3, Silver AV Standard Issue BS, GB w/VA FoC, Silver AV Green, OBS v3 Crimson Reaper, Emerald, Silver AV Blue, OBS v3, recharge port Crimson Liberator, Stunt Archon v2.1; CG w/AS FoC, AV Blue, OBS v4
|
|
|
|
Roband
Knight Lieutenant
Force Alignment: -38
Posts: 232
Everything in moderation, including moderation.
|
|
« Reply #10 on: July 02, 2015, 04:58:36 AM » |
|
One thing not mentioned that I discovered, is that on a saber with a dedicated channel to the AV switch, you can make the AV switch pulse or Flash on clash by adjusting that fourth channel independent of whatever blade color scheme you have on the saber, which opens the door to other posible interesting visual effects in the hilt. (pulsating crystal chamber maybe?)
|
|
|
Logged
|
PASSION, yet PEACE SERENITY, yet EMOTION CHAOS, yet ORDER THE FORCE, in BALANCE
|
|
|
|
Crag Dweller
Knight Apprentice
Force Alignment: 7
Posts: 27
Light Side points please
|
|
« Reply #11 on: March 08, 2016, 04:51:11 AM » |
|
Thanks to all for this discussion. I created this problem on one of my Emerald sabers and can now go about getting it back to spec.
Cheers!
|
|
|
Logged
|
"Sometimes you're the windshield, sometimes you're the BUG" - Mark Knopfler 1991
Sabers so far: Guardian - (Emerald) Azure Menace - (Emerald) Archon 2.1 - (Emerald) Dark Arbiter - Guardian Blue Bellicose - Arctic Blue Azure Mantis - (Emerald) Graflex CE - (Emerald)
|
|
|
|
|