Click here for lightsabers
  • Home
  • Help
  • Login
  • Register
Pages: [1]   Go Down
Author Topic: Emerald Driver FOC Issue  (Read 2098 times)
Venger
Knight Aspirant
*

Force Alignment: -4
Posts: 15
« on: January 07, 2014, 08:36:58 PM »
After receiving my new saber, I decided to try out some of the colours and change the FOC from Orange to a different colour. After the first try I successfully changed the FOC, but on the second try I am unable to get the software to write the new colour. The software previews the colour and the effect, but does not write it to the device. I get no error message. Am I doing something wrong?

I do however get a USB device failed to be installed (Windows 7) when plugging the saber in via the Emerald port, but not on the Obsidian port. Although this caused no issue the first time round. Could this be my problem?
Logged

Venger
Knight Aspirant
*

Force Alignment: -4
Posts: 15
« Reply #1 on: January 07, 2014, 11:26:44 PM »
Turns out I'm a complete idiot and have been pressing the wrong button to write the colours etc. Handy tip of the day guys... watch the video and listen to what Emory says!  Roll Eyes
Logged

Brian64
Knight Commander
*

Force Alignment: 149
Posts: 700


This is a fertile land, and we will thrive
« Reply #2 on: January 08, 2014, 07:56:38 AM »
Another good tip after having some troubles reprogramming my new Raven yesterday... Charge the saber first! Smiley
Logged

Light side points please

Pages: [1]   Go Up
Send this topic | Print
Jump to: