My first saber kit.

[BlackAgates]

Hello community members !! 

As per my Introduction post, I am getting ready to submit my order for my first saber.
My armament will be the Dark Initiate V4.  I chose a duplicate of the main color for Diamond Pulse for my Initial setup, it seems like it should be a cool flicker effect 

First off, i am holding off on some of the features for a few reasons:
1)   I am low on funds   
2)   The Covertec equipment..  I am not clear whether or not the the wheel can be removed.  Does anyone know?  I was thinking about trying to put a clip on a surface or a bag maybe. 
3)   No Recharge port in the budget right now..
4)   No emitter windows for personal preference.
5)   Extra blades will have to wait, so far the 36" mid-grade seems most suitable considering i have not gotten into sparring yet, but def. want to add a H blade to my kit eventually.

What do you guys think?


specs
Choose Your Configuration: Diamond Controller
Diamond Controller LED Type: RGBW LED [Recommended]
Choose the color of your blade!: Adegan Silver for Diamond
Diamond Flash on Clash: Flash Sentinel Yellow for Diamond
Diamond Pulse Mode: Diamond Pulse to Adegan Silver
Battery Configuration: Li-Ion Setup (Batteries & Charger Included)
Recharge Port: No Recharge Port
Blade Option: Mid Grade
Blade Size: X-Long 36" Blade
Windows: No Windows in Emitter
Diamond Sound: Diamond Sound
Pommel: Regular Vented Pommel (hole in bottom) [Recommended]
Switch Type: Black Non-Illuminated AV Switch
Choose Blade Tip Type: Round Tip
Blade Retention Screw Wrench: No Thanks
Include Blade Plug: No Thanks
Include Saber Stand: No Thanks
Include MICRO USB Cable: No Thanks
Include Covertec Clip: No Thanks
Install Covertec Wheel: No Thanks

[Therion Jinn]

So long as you have a spare micro USB cable available to access the Diamond controller, you should be fine

[Cyclops942]

I think having the main color and the pulse color be the same will make the pulse unnoticeable in practice, since there will be no change in color.  Is this really what you want?

And I would recommend getting the wrench for $1, unless you know for a fact you have a 5/64" hex wrench available, that you can find right now, and that you won't lose.  If you're anything like me, knowing you have a tool is meaningless, unless you have JUST NOW located by both eyes and hands, not only by memory.

[BlackAgates]

So long as you have a spare micro USB cable available to access the Diamond controller, you should be fine

Excellent armor.
Forging, Smithing, and Engineering +++

[Therion Jinn]

Excellent armor.
Forging, Smithing, and Engineering +++

Thank you

[TR-77477]

As for the covertech, the wheel can be removed from the saber. It is a simple task as its only held on my a allen head screw. The holder is designed to attach to any belt and modifying it to work with a pouch should not be a problem. Just take your time and think out the end product. Remember that with the saber attached you will have a decent amount of weight hanging so you want to be sure the attachment point is strong enough to handle it.