|
Title: Bellicose Retention Screw Size Post by: BatMike90 on January 21, 2017, 04:31:17 PM After digging around for some information, I came across the size of allen key I would need for the Bellicose blade holder? Is 1/16th correct?
Title: Re: Bellicose Retention Screw Size Post by: Landen Se-Sentien on January 21, 2017, 05:09:44 PM You need 3/32.
Title: Re: Bellicose Retention Screw Size Post by: BatMike90 on January 21, 2017, 06:34:12 PM You need 3/32. Thank you for the response but I have gotten myself confused somehow. I have the standard allen key, which size do I need to access the screws on the blade holder? Title: Re: Bellicose Retention Screw Size Post by: Landen Se-Sentien on January 21, 2017, 06:47:20 PM There are 3 retention screws. Two hold the blade inside the blade holder. One holds the blade holder in the emitter.
The two that hold the blade inside the blade holder use the standard 5/64 hex wrench. The one that holds the blade holder inside the emitter uses a 3/32 hex wrench. |