|
Title: Emerald saber light question. Post by: Ryvius on September 17, 2019, 03:19:15 PM Hello. So I bought an Emerald Saber (a Guardian Blue Specter) and my brother and I were playing (rather foolishly in hindsight, since we had no idea what we were doing) with the settings regarding the blade color, pulse mode, flash, etc.
My blade had a blue light up activation switch and somehow my brother deactivated it when the blade turns on. It only flashes blue when I activate the flash on clash. My brother says he cant find a setting for the activation switch on the program. Can anyone please tell me how to fix this? Title: Re: Emerald saber light question. Post by: Karmack on September 17, 2019, 04:36:46 PM Lit AV switches on Emerald sabers are often linked to channel 4 on the driver. To keep it on, you need to turn that channel on all the way.
The verify, though, find which slider is turned up on the flash option, as it is obviously linked to that. Turning up channel 4 and leaving it up should power the AV switch. Title: Re: Emerald saber light question. Post by: chalion on September 17, 2019, 09:57:01 PM Point to Karmack for the info.
Title: Re: Emerald saber light question. Post by: Ryvius on September 18, 2019, 12:25:48 AM Lit AV switches on Emerald sabers are often linked to channel 4 on the driver. To keep it on, you need to turn that channel on all the way. The verify, though, find which slider is turned up on the flash option, as it is obviously linked to that. Turning up channel 4 and leaving it up should power the AV switch. Thank you for the info! I'll be sure to look into that as soon as I can! |