|
Title: Did I make a mistake with my emerald saber? Post by: Ginsu117 on April 19, 2016, 02:33:18 AM I just realized...did I make a poor decision? I went with the recommended setting of channel 4 on my emerald being dedicated to my saber which would be white. So does that mean I cant use white when customizing the color? Only RGB now? And if so can you still make a pure white blade using RGB and ways around needing the white channel for blade colors only using RGB?
Title: Re: Did I make a mistake with my emerald saber? Post by: sedstiskyfaller on April 19, 2016, 03:29:50 AM Choosing the dedicated option for the AV switch does unfortunately take up channel 4 W or A :-\
The white channel gives the purest white and allows for lightening up other colors. Setting all other channels at 100% will give you a white with a slight red tint. Title: Re: Did I make a mistake with my emerald saber? Post by: Ginsu117 on April 19, 2016, 03:35:37 AM Choosing the dedicated option for the AV switch does unfortunately take up channel 4 W or A :-\ The white channel gives the purest white and allows for lightening up other colors. Setting all other channels at 100% will give you a white with a slight red tint. Ok, so I can work around the white and brighten a color using different RGB setting, and if I want white my battery is going to drain like hell lmao. Damn really wanted a pure white. Is this slight red tint bothersome or is barely noticeable? Title: Re: Did I make a mistake with my emerald saber? Post by: sedstiskyfaller on April 19, 2016, 03:47:44 AM Ok, so I can work around the white and brighten a color using different RGB setting, and if I want white my battery is going to drain like hell lmao. Damn really wanted a pure white. Is this slight red tint bothersome or is barely noticeable? If you are using it as a flash color, it won't be that noticeable, but as a steady blade color you can tell. It's definitely something you can work around though, since all the colors are made with RGB :) Title: Re: Did I make a mistake with my emerald saber? Post by: Karmack on April 19, 2016, 01:46:07 PM I think the mix for white is actually 100% green and somewhere in the 80's for red and blue. In the Obsidian forum there is an emerald sub-forum with info on color mixes for Emerald as well, which can be very helpful. Adegan Silver (White) is on the list. :-) Look down through the thread to find the newer percentage settings.
http://www.saberforum.com/index.php?topic=23756.0 Title: Re: Did I make a mistake with my emerald saber? Post by: Ginsu117 on April 19, 2016, 02:03:15 PM I think the mix for white is actually 100% green and somewhere in the 80's for red and blue. In the Obsidian forum there is an emerald sub-forum with info on color mixes for Emerald as well, which can be very helpful. Adegan Silver (White) is on the list. :-) Look down through the thread to find the newer percentage settings. [url]http://www.saberforum.com/index.php?topic=23756.0[/url] Thanks man! Title: Re: Did I make a mistake with my emerald saber? Post by: Racona Nova on April 19, 2016, 06:40:36 PM Or use the "Easy Mode" in the launcher which takes you to an RGB colour picker, similar to Paint/Photoshop/Illustrator and other graphics and photo editing software. There you can pick the pure White and let the Driver set the appropiate settings for the Red, Green and Blue channels.
|