|
Title: Can you turn flash on clash off? Post by: Bakjam on August 04, 2019, 10:20:30 PM Just a quick question:
Can you turn flash on clash off? Title: Re: Can you turn flash on clash off? Post by: Therion Jinn on August 05, 2019, 02:19:11 AM To my knowledge, no
You should be able to, with an Emerald or Diamond saber, but not on a more normal one. It's a function of how the LEDs are wired Title: Re: Can you turn flash on clash off? Post by: Bakjam on August 05, 2019, 05:06:10 AM To my knowledge, no You should be able to, with an Emerald or Diamond saber, but not on a more normal one. It's a function of how the LEDs are wired But I can change the sensitivity or remove the FoC cable when using a MLS unit? Title: Re: Can you turn flash on clash off? Post by: Karmack on August 05, 2019, 04:53:25 PM But I can change the sensitivity or remove the FoC cable when using a MLS unit? You can remove the FoC cable from the MLS unit or even just snip the wire and that will stop it from working. I think on the Obsidian V3 and V4 boards you can also adjust the sensitivity of the clash activation, which should govern both the sound and the visual effect. Title: Re: Can you turn flash on clash off? Post by: Racona Nova on August 05, 2019, 09:29:42 PM You can disable the FoC on all Premium Obsidian sound boards via the UltraSabers Launcher. Connect the sound board, go to the Obsidian sound board tab and un-check the check-box reading "Enable Flash-On-Clash Light effects". That disables FoC without messing around with the critical internals (wiring etc.).
It's a bit different on Emerald and Diamond: Emerald: Emerald tab -> Flash on Clash section on the lower half of the window -> Un-check "Enable" Diamond (Advanced Font Wizard): Diamond tab -> Font Wizard -> Lockup Effect -> either "Clear Effect" to remove it completely or "Edit Effect" to edit the colour effects Diamond (Express Font Wizard): Diamond tab -> Font Wizard -> Lockup (circle and locker in the top left corner) -> Un-check "Enable light" The Launcher asks you which Wizard you want to use at first start-up, but you can always switch between them by clicking on either "Advanced wizard" (in the Express Wizard window) or "Express wizard" (in the Advanced Wizard window). Title: Re: Can you turn flash on clash off? Post by: Karmack on August 05, 2019, 09:48:16 PM You can disable the FoC on all Premium Obsidian sound boards via the UltraSabers Launcher. Connect the sound board, go to the Obsidian sound board tab and un-check the check-box reading "Enable Flash-On-Clash Light effects". That disables FoC without messing around with the critical internals (wiring etc.). It's a bit different on Emerald and Diamond: Emerald: Emerald tab -> Flash on Clash section on the lower half of the window -> Un-check "Enable" Diamond (Advanced Font Wizard): Diamond tab -> Font Wizard -> Lockup Effect -> either "Clear Effect" to remove it completely or "Edit Effect" to edit the colour effects Diamond (Express Font Wizard): Diamond tab -> Font Wizard -> Lockup (circle and locker in the top left corner) -> Un-check "Enable light" The Launcher asks you which Wizard you want to use at first start-up, but you can always switch between them by clicking on either "Advanced wizard" (in the Express Wizard window) or "Express wizard" (in the Advanced Wizard window). Well! Learn something new every day! So the only place you might have FoC and need to do anything physically to disable it would be on an Obsidian Lite board. :) Good deal! Thanks Racona! Schooling us as always! LOL Title: Re: Can you turn flash on clash off? Post by: chalion on August 05, 2019, 10:02:24 PM Point to Racona Nova for valuable information.
Point also to the OP for having asked that question. Title: Re: Can you turn flash on clash off? Post by: Racona Nova on August 06, 2019, 01:40:11 PM Well! Learn something new every day! So the only place you might have FoC and need to do anything physically to disable it would be on an Obsidian Lite board. :) Good deal! Thanks Racona! Schooling us as always! LOL Correct, Obsidian Lite might be a problem :D You could insert one of those QD adaptor to disable FoC, but that means messing around with wires etc. Title: Re: Can you turn flash on clash off? Post by: Karmack on August 06, 2019, 02:34:11 PM Correct, Obsidian Lite might be a problem :D You could insert one of those QD adaptor to disable FoC, but that means messing around with wires etc. LOL I was thinking of a dip switch... :-) Title: Re: Can you turn flash on clash off? Post by: Racona Nova on August 06, 2019, 06:25:06 PM Also possible...;)
|