|
Title: How to adjust colors? Post by: HeClearlyLikesIt on May 04, 2020, 07:17:17 PM So its more than likely just me being dumb, but I can't quite figure out how to change the color on my new emerald dark war glaive. Am I missing something?
Title: Re: How to adjust colors? Post by: Racona Nova on May 04, 2020, 07:24:09 PM You have to unscrew the pommel, then shake out the battery pack until you see a USB port. You may have to pull a bit - gently, don't damage the wires. If you have Premium sound and Emerald, the Emerald port is the one that comes second. The first would be for the sound board.
Connect the Emerald board to your PC, install and open the UltraSabersLauncher (both as administrator) and then go to the Emerald tab. There you can change your idle colour, Pulse colour and Flash on Clash colour (only on Emerald sabers with sound) as well as various timings. Title: Re: How to adjust colors? Post by: HeClearlyLikesIt on May 04, 2020, 10:06:22 PM Much obliged, was missing the port. I was expecting mirco usb, not a mini, so I'll have to go pick up a cable. Thanks for the help!
Title: Re: How to adjust colors? Post by: Racona Nova on May 05, 2020, 11:35:28 AM No problem! Make sure you get a cord capable of data transfer. A simple charging cord will not work ;)
|