|
Title: MHS Component Lengths Post by: thisberichard on December 28, 2012, 06:31:30 PM While we have a wonderful thread (http://www.saberforum.com/index.php?topic=4779.0) about the dimensions of the various hilts offered by Ultrasabers, I haven't seen any catalogue for the lengths added by the numerous MHS components -- mostly pommels, bodies, and to a lesser extent, emitters -- available. Since I figured that a list of those measurements would be helpful to people interested in mixing and matching saber bits (including myself at an absolute minimum), I decided to pull together a chart.
The following list comes primarily from measurements stated on the main site (and extrapolations therefrom, when possible), but I also plugged a couple of holes with information from the hilt measurements thread (http://www.saberforum.com/index.php?topic=4779.0) and, in one particular case, an answer (http://www.saberforum.com/index.php?topic=11253.msg177828#msg177828) I was given in a review thread. I'll try to keep this updated as well as I can. If anyone can help me fill in the blanks, I'd be much obliged. Thank you, and I hope this helps!
Reaper Body Reaper Neck Reaper Emitter with Claw Reaper Emitter without Claw Reaper Pommel with Claw Reaper Pommel without Claw Reaper, Fully Assembled with Claws 19.5 49.53 Reaper, Fully Assembled without Claws 15 38.1 Title: Re: MHS Component Lengths Post by: eerockk on December 28, 2012, 07:45:55 PM Well, this deserves a sticky or merge into the other Hilt Length thread!
Great job, thisberichard! Title: Re: MHS Component Lengths Post by: thisberichard on January 07, 2013, 07:21:17 PM Does anybody have any other lengths they can share? All it takes is an unlisted saber bit and a ruler.
I'd do it myself, but every saber piece I've any claim to is already up there. Title: Re: MHS Component Lengths Post by: Vex on January 07, 2013, 07:24:48 PM Very nice,thanknyou!
Title: Re: MHS Component Lengths Post by: thisberichard on January 14, 2013, 12:56:44 PM Can't seem to edit the first post, so I'll add what we know about the reaper so far.
As always, if anyone can plug any of the holes in the list, it'd be highly-appreciated.
Title: Re: MHS Component Lengths Post by: thisberichard on May 07, 2013, 04:44:29 PM Overlord Body 9.9 25.146
Overlord RGB Body 11.15 28.321 Overlord Emitter 2.1 5.334 Overlord Pommel 0.25 0.635 Overlord, Fully Assembled 12.25 31.115 Overlord RGB, Fully Assembled 13.5 34.29 Title: Re: MHS Component Lengths Post by: Wobbywoo on January 25, 2014, 09:34:13 PM Hey there.
Does anyone know the diameter of the Manticore Emitter? Thanks Wobbywoo Title: Re: MHS Component Lengths Post by: Kal-El on May 03, 2014, 11:59:49 PM This is the most important part of customizing! Knowing the length of parts, second would be weights! Very well done. Points have been given.
Title: Re: MHS Component Lengths Post by: Racona Nova on May 04, 2014, 01:31:44 PM Adjustable Flush Coupler
inch: 1.9 centimeters: 4.826 Title: Re: MHS Component Lengths Post by: Dino27 on August 06, 2016, 11:37:01 PM Oooh. That's a nice, long list. I'll have to refer to this in future when I'm planning mix-and-match sabers and want a certain size. Thanks for putting this together!
Title: Re: MHS Component Lengths Post by: Calculon on February 06, 2017, 05:50:07 PM Could have used this months ago. Thanks for the work!
Title: Re: MHS Component Lengths Post by: Lordwaterfall on June 30, 2017, 12:26:47 AM Hey there. Does anyone know the diameter of the Manticore Emitter? Thanks Wobbywoo Top is 1 and 7/8 inches Bottom is 1 and 3/4 inches Title: Re: MHS Component Lengths Post by: Wobbywoo on July 23, 2017, 03:24:30 PM Top is 1 and 7/8 inches Thank you! I take it you take dark side points?Bottom is 1 and 3/4 inches Title: Re: MHS Component Lengths Post by: brad81380 on July 27, 2017, 01:07:54 PM Does anyone know the length and width of the Dominix V4? I know it is 4.75 inches at the first choke. I am working on rewiring some internal components to do upgrades and change out a couple external parts(including putting a different switch on mine.....just going from a plain black av to an led version).
Title: Re: MHS Component Lengths Post by: Obese Wan Kenobese on July 17, 2018, 01:54:41 AM US site says in parts...
Dorinian pommel is 2 inches Menace emitter is 2.8 inches Title: Re: MHS Component Lengths Post by: imgumby001dammit on July 17, 2018, 12:24:55 PM Thanks to you! For the benefit of us all!!!!
Title: Re: MHS Component Lengths Post by: Infinit01 on July 17, 2018, 06:13:43 PM Hey all, I've added all of the info into an Excel spreadsheet and placed them in alphabetical order. You can download it here: https://www.dropbox.com/s/f01l16lrfiug9mv/MHS%20Component%20Lengths.xlsx?dl=0
Title: Re: MHS Component Lengths Post by: Obese Wan Kenobese on July 19, 2018, 01:46:37 AM Dorinian emitter: 2 1/2 inches from top of threads to end cap. Dorinian body: 7 inches Dirinian pommel: 2 9/16 inches from top of threads to bottom button on the end cap Title: Re: MHS Component Lengths Post by: Infinit01 on July 19, 2018, 07:14:02 AM Updated, thanks. Here's the new link: https://www.dropbox.com/s/dildjlyhcquouai/US%20-%20MHS%20Component%20Lengths.xlsx?dl=0 Title: Re: MHS Component Lengths Post by: StoryDtechtive on August 09, 2018, 04:40:09 AM Thank you for the useful information :)
Title: Re: MHS Component Lengths Post by: Hulk10 on February 08, 2021, 12:17:08 AM What about width?
|