|
Title: The different Obsidian board settings and what they affect Post by: Racona Nova on September 24, 2016, 08:24:52 PM Since there are more and more questions on what the different Obsidian settings mean and what they affect, here's a short but simple explanation of any of the settings:
Motion Threshold: Overall sensitivity of the motion detection sensor. The lower the number, the more sensitive the sensor is - and the higher is the triggering of fake motion sounds. Motion Integration Time: Sensitivity of the motion sensor in regards of the above mentioned fake triggers. The lower the number, the more sensitive the saber is and more fake triggers occur. Rising the number lowers the fake trigger chance, but also overall sensitivity. Use this in combination with Motion Threshold to achieve high sensitivity without too many fake triggers. Impact Thresold: The same as Motion Thresold, only for the impact detection sensor. Impact Debouncing Time: The same as Motion Integration Time, only for fake triggers of the impact sensor. Minimum Time Between Impacts: This sets the reset speed of the impact sensor. The lower the number, the faster the sensor can react to subsequent impacts. Lockup Flash Time (only for Flash on Clash enabled sabers without the Emerald Driver): The simplest of the settings. It controls the speed of the lockup light effects - the higher, the faster. Title: Re: The different Obsidian board settings and what they affect Post by: Gar-Wi Musan on March 30, 2018, 10:23:32 AM *renewing request to sticky this thread* ;) I second that request. Thank's for posting this. Title: Re: The different Obsidian board settings and what they affect Post by: Dauntless Seven on March 30, 2018, 04:57:24 PM Hi Rac. I'm a tad late in catching this... but here's your sticky. Valuable information provided. Thanks. :D
point for you and Gar for bringing this to the Mod's attention :) Title: Re: The different Obsidian board settings and what they affect Post by: Racona Nova on March 30, 2018, 06:04:32 PM Thanks, D...almost forgot that this request was still there :D Could have done that myself if I would've remembered :P
Title: Re: The different Obsidian board settings and what they affect Post by: Dauntless Seven on March 30, 2018, 06:16:23 PM You are welcome. :) I know that... but thought that perhaps with your humility that you didn't want to do this. ;) ;D
Title: Re: The different Obsidian board settings and what they affect Post by: Racona Nova on March 30, 2018, 06:24:09 PM Oh you...lovely :-* ;D
Getting off-topic again....;) Title: Re: The different Obsidian board settings and what they affect Post by: Blade Runner 62 on October 26, 2022, 04:47:22 PM Thank you for putting this info out there. I just picked up my Fallen with the V4 board and was looking for this.
|