Saber Forum

Ultra Sabers Discussion => Ultra Sabers Questions => Topic started by: doomblade0 on January 11, 2017, 02:55:10 PM



Title: Double Bladed Saber from Grab Bag??
Post by: doomblade0 on January 11, 2017, 02:55:10 PM
So I had been looking at ultrasabers for a long time, and I liked the Grab Bag deal, so I decided to get two. I got a Standard Issue Battle Saber and what I believe to be the Aeon V4 (without the top details cut out where the blade could be visible). I am able to put the pommels of both sabers on either-or, so I was wondering if I could combine them with a coupler? and If so, I have no clue what couplers would work...
        Thanks for any advice!


Title: Re: Double Bladed Saber from Grab Bag??
Post by: scifidude79 on January 11, 2017, 03:11:15 PM
Post a pic of the saber you think is an Aeon V4 and we can tell you if you're right.  :)

If it is a V4 and the other is a Standard Issue, you can certainly combine them into a staff.  The Standard MHS coupler will combine them flush, making it look like one big hilt.  You can also use a Flush coupler to make it a bit longer, or the Quick Release coupler if you want to be able to disconnect them on the fly.  The only two couplers that won't work with your sabers are the two V2 couplers.  Those are designed for the thinner hilts.  Anything else will work.


Title: Re: Double Bladed Saber from Grab Bag??
Post by: doomblade0 on January 11, 2017, 05:02:34 PM
Im not sure how to post a picture? I've been trying and failing...I am very new to this forum


Title: Re: Double Bladed Saber from Grab Bag??
Post by: scifidude79 on January 11, 2017, 05:33:41 PM
You have to have your photo uploaded somewhere else.  Flickr, Dropbox, Photobucket, etc.  Then you put the link to the photo into the body of the post using the [img] tags.


Title: Re: Double Bladed Saber from Grab Bag??
Post by: doomblade0 on January 11, 2017, 07:17:33 PM
AHHH ok, thanks haha!
Here ya go!
(https://www.dropbox.com/s/tmebe7brjilf0s8/image1.JPG?dl=0)

Edit.... that didn't sem to work either?
https://www.dropbox.com/s/tmebe7brjilf0s8/image1.JPG?dl=0
I will just post the link...


Title: Re: Double Bladed Saber from Grab Bag??
Post by: PrincessKnowItAll on January 11, 2017, 07:18:06 PM
If the hilt on the Aeon is just cylindrical no curves then you got a V2, but you said you can interchange the pommels so despite if it is a Aeon V3 or Aeon V4 you can couple them together for double bladed pleasure. Couplers are here:https://www.ultrasabers.com/category-s/87.htm vented couplers are required for saber with sound, but you can use then for stunt sabers (no sound). The buttons do not line up so if you are a bit OCD get the Adjustable, because I believe even the Quick Release Coupler has a slight spin.


Title: Re: Double Bladed Saber from Grab Bag??
Post by: doomblade0 on January 11, 2017, 10:19:22 PM
If the hilt on the Aeon is just cylindrical no curves then you got a V2, but you said you can interchange the pommels so despite if it is a Aeon V3 or Aeon V4 you can couple them together for double bladed pleasure. Couplers are here:https://www.ultrasabers.com/category-s/87.htm vented couplers are required for saber with sound, but you can use then for stunt sabers (no sound). The buttons do not line up so if you are a bit OCD get the Adjustable, because I believe even the Quick Release Coupler has a slight spin.
So based on this, V3 and V4 are compatible with each other?


Title: Re: Double Bladed Saber from Grab Bag??
Post by: Vivectius on January 12, 2017, 04:52:28 AM
So based on this, V3 and V4 are compatible with each other?

Correct.  The only real difference between v3 and v4 sabers in general is that the v3's can have Obsidian sound or the Emerald driver, but not both.  The v4's can have both.  All couplers and pommels that can be used on a v3 can be used with a v4, and vice versa.


Title: Re: Double Bladed Saber from Grab Bag??
Post by: doomblade0 on January 13, 2017, 01:07:12 AM
Correct.  The only real difference between v3 and v4 sabers in general is that the v3's can have Obsidian sound or the Emerald driver, but not both.  The v4's can have both.  All couplers and pommels that can be used on a v3 can be used with a v4, and vice versa.
Okay, makes sense! Thanks for all the help everyone!!


Title: Re: Double Bladed Saber from Grab Bag??
Post by: GregG124 on January 13, 2017, 01:34:49 AM
Just to confirm...you indeed have an Aeon V4!