Saber Forum

Ultra Sabers Discussion => ANNOUNCEMENTS => Topic started by: Deep on July 29, 2018, 09:34:22 PM



Title: New Saber: Spectre
Post by: Deep on July 29, 2018, 09:34:22 PM
We're extremely excited to present this one to you guys- it has immediately become one of our favorite sabers in the arsenal, and we're sure you'll agree.

Top to bottom, this saber is packed with features that we've been itching to outfit a single saber with for a long time.

Say hello to one of the most beautiful emitters we've ever crowned an Ultrasaber with. The Spectre's emitter rests atop the first rounded guard we've ever featured, and is available with or without the beautiful wrap-around vertical windows for a look of pure elegance.  

The emitter's features don't stop there. The Spectre is the first Ultrasaber that can be worn in two parts. We've designed the Spectre to accommodate a covertec wheel in the emitter so that it can hang from your belt independently of the hilt.  If you recognize this saber from it's inspired source, you'll understand why we're so excited to be able to offer this feature, and why we worked so hard to make sure it was included.

You've undoubtedly already noticed the body of the Spectre. You all asked us to bring more sabers with etching to the lineup, and we weren't about to hesitate to give you all what you ask for.  The Spectre has been given the full-pattern treatment, with an intricate circuit board look that's sure to turn some heads. For you purists out there: we haven't forgotten about you!  The Spectre's body is available in a classic black anodized finish for that clean tuxedo look that you know and love from Ultrasabers. Finally, The Spectre comes standard with a covertec wheel that rests centered on the back of the shroud above the pommel.

You Ultrasabers veterans know that our features and options don't stop there! We got such great feedback from all of you when we released our square and angled activation boxes, so we especially wanted to bring them back for The Spectre's hilt to really complete the saber's look.

And last, but definitely not least, we've capped off the Spectre with a great new pommel that really gives it the perfect balance you know we prioritize in a saber crafted for expert combat.  The Spectre's pommel features four cardinal direction ridges that alternate with the position of the sound vents and really compliment the vertical etching that runs the length of the shroud. The Spectre's pommel has been designed to accommodate a D-Ring for another option to be worn for cosplay (or any other night on the town).

The Spectre comes completely assembled and ready to go. The emitter and pommel are removable and compatible with TCSS MHS parts. This saber can accommodate Sound, Diamond Controller, and the Emerald LED driver.

The Spectre (https://ultrasabers.com/product/the-spectre/)

http://www.youtube.com/watch?v=d_XJPyEtrq0&feature=youtu.be



(http://ultrasabers.com/wp-content/uploads/2018/07/Wide-Engraving.jpg)

(http://ultrasabers.com/wp-content/uploads/2018/07/Wide-No-Engraving.jpg)

(http://ultrasabers.com/wp-content/uploads/2018/07/Spectre-Front-Engraving.jpg)

(http://ultrasabers.com/wp-content/uploads/2018/07/Spectre-Front-No-Engraving.jpg)

(http://ultrasabers.com/wp-content/uploads/2018/07/Spectre-Emitter-Windows.jpg)

(http://ultrasabers.com/wp-content/uploads/2018/07/Spectre-Emitter-No-Windows.jpg)

(http://ultrasabers.com/wp-content/uploads/2018/07/Spectre-Pommel-NO-Ring.jpg)

(http://ultrasabers.com/wp-content/uploads/2018/07/Spectre-Pommel-with-Ring.jpg)

(https://ultrasabers.com/wp-content/uploads/2018/07/Spectre-Activation-Box-Square.jpg)

(https://ultrasabers.com/wp-content/uploads/2018/07/Spectre-Activation-Box-Angled.jpg)


Title: Re: New Saber: Spectre
Post by: Frizzenflyer on July 29, 2018, 10:10:01 PM
That is awesome!


Title: Re: New Saber: Spectre
Post by: Malik Thanewulf on July 29, 2018, 10:14:47 PM
Wow. This is one really nice looking saber. Think I'd want two of those. I'd have both finishes. Nice job Ultrasabers.


Title: Re: New Saber: Spectre
Post by: Darth Tepes on July 29, 2018, 11:10:20 PM
Gah!  The one I've been waiting for...nooo  my wallet is not ready yet.   


Title: Re: New Saber: Spectre
Post by: For Tyeth on July 29, 2018, 04:39:32 PM
Excellent work and really nice details on this saber. Piano black or circuitry?... argh all these hard choices!


Title: Re: New Saber: Spectre
Post by: Darth Davester on July 29, 2018, 11:44:48 PM
Wow! That is gorgeous!


Title: Re: New Saber: Spectre
Post by: Dauntless Seven on July 29, 2018, 04:45:51 PM
The circuitry one will be mine.  Just have to figure out the LED color.  :D


Title: Re: New Saber: Spectre
Post by: Darth Davester on July 29, 2018, 11:58:59 PM
The circuitry one will be mine.  Just have to figure out the LED color.  :D

That is a tough one.

Right now,  I'm thinking maybe SRD with AB FOC.

I'll probably change my mind, though.


Title: Re: New Saber: Spectre
Post by: Darth Tepes on July 30, 2018, 12:11:15 AM
The circuitry one will be mine.  Just have to figure out the LED color.  :D

Myself, Im considering BR with VA FOC


Title: Re: New Saber: Spectre
Post by: tx_tuff on July 30, 2018, 12:46:05 AM
Love that it has an LED screw to hold it in place. I know it is for a reason but it would still be nice to see this become a standard.


Title: Re: New Saber: Spectre
Post by: Dauntless Seven on July 30, 2018, 12:55:43 AM
That is a tough one.

Right now,  I'm thinking maybe SRD with AB FOC.

I'll probably change my mind, though.


I have another saber with that combo and really like it.  However with the Spectre being such a bold saber... those color combos may be too soft or not dynamic enough if the circuitry model is chosen.  :)



Myself, Im considering BR with VA FOC


Me too and perhaps a QD for other options as I don't like fiddling around with my sabers on a computer.  :)


I wonder if this is going to be a wide girth saber like the Fulcrum and if the open slats in the shroud will be uncomfortable without gloves.  Am already thinking of other emitters and pommels to swap out.  :D


Title: Re: New Saber: Spectre
Post by: Darth Tepes on July 30, 2018, 01:10:12 AM

I have another saber with that combo and really like it.  However with the Spectre being such a bold saber... those color combos may be too soft or not dynamic enough if the circuitry model is chosen.  :)




Me too and perhaps a QD for other options as I don't like fiddling around with my sabers on a computer.  :)


I wonder if this is going to be a wide girth saber like the Fulcrum and if the open slats in the shroud will be uncomfortable without gloves.  Am already thinking of other emitters and pommels to swap out.  :D


Really for me its the Emitter itself I want.  But it doesn't seem to be for sale separately.  BTW  Can anyone fill me in on what Mass Effect has to do with this? Not knowledgeable of that franchise


Title: Re: New Saber: Spectre
Post by: Jeadus Teal on July 30, 2018, 02:05:28 AM
It's been a while since the last time I posted. Great work on the new Spectre saber. It looks great and I like the options you get for this saber.


Title: Re: New Saber: Spectre
Post by: BatMike90 on July 30, 2018, 02:14:40 AM
The last couple of new sabers, were passable, in my opinion. The Spectre is a Wishlist saber.


Title: Re: New Saber: Spectre
Post by: bigBear on July 30, 2018, 02:20:12 AM
really can see this turning into a hit with many people.


Title: Re: New Saber: Spectre
Post by: Rapine on July 30, 2018, 02:43:42 AM
Oh very excellent.   :o

Another wishlist addition...heh.  Way to go US crew!


Title: Re: New Saber: Spectre
Post by: scifidude79 on July 30, 2018, 04:21:36 AM
Seeing this makes me glad I'm waiting until I get paid next week to put in a raffle order. It was going to be a Dorinian, but now I see it will be a Spectre.  I'm thinking Sunrider's Destiny, V4 sound, yes to both windows and engraving. The only part I'm uncertain on is the control box, I love both. However, the switch will be black because that looks awesome. ;D

Edit: I'm thinking angled activation box so that I can see more of that awesome engraving.


Title: Re: New Saber: Spectre
Post by: Infinit01 on July 30, 2018, 04:47:48 AM
I've been hoping that US would make an emitter with a Katana like guard to add to one of my sabers.  Now, I'll have to buy an emitter and the Spectre as well.  Looking forward to this!


Title: Re: New Saber: Spectre
Post by: naeblis on July 29, 2018, 09:54:20 PM
Wow. This is one really nice looking saber. Think I'd want two of those. I'd have both finishes. Nice job Ultrasabers.


I am with you.  I am having a hard time deciding between the two.


Title: Re: New Saber: Spectre
Post by: naeblis on July 29, 2018, 09:56:12 PM
I put this on the suggestion box /wish list a month or so ago.  This is amazing.  I love my Emperor's hand....but this may become my new favorite.  THANK YOU US!!!!!!!


Title: Re: New Saber: Spectre
Post by: AggieDeveloper on July 30, 2018, 06:13:06 AM
Wow! That is amazing looking! And I love all of the options. That etched circuit looks really great. :o


Title: Re: New Saber: Spectre
Post by: Draddog on July 30, 2018, 06:23:34 AM
Ordered! Of course the obvious question is how long till it ships?  ;D


Title: Re: New Saber: Spectre
Post by: Moderator Nightwing on July 30, 2018, 06:45:03 AM
REALLY nice job on this one.
Based on one of my all time favorite characters' sabers, and is a nice size too!

The detachable emitter is a nice touch; probably not a feature I will use often, but a cool one nonetheless.

My debate is which activation box to get.  Square is more accurate, but the angled looks more comfortable to hold.

Thanks for bringing such a great saber to us!

Now to wonder which design comes out next: a Mandalorian inspired saber, an apprentices dual action taser(or blaster?)/saber, or an imbalanced apprentice's saber?
(translation, darksaber, Ezra's first saber, Ezra's second saber :P)


Title: Re: New Saber: Spectre
Post by: Zren Tobas on July 29, 2018, 11:50:37 PM
I already want me one :P Blazing Red, no emitter covertech though, square box for the more classic look, black av switch, no pommel d-ring, emitter windows =] Can't wait to get me one :P Just from the name its sounding more dark side to me if anything, but no engraving for me, want my saber to be all totally classic looking


Title: Re: New Saber: Spectre
Post by: Lady Agana Kath on July 30, 2018, 07:22:40 AM
And another wishlist saber that I can't afford right now. Absolutely beautiful saber


Title: Re: New Saber: Spectre
Post by: Saso Is-kor on July 30, 2018, 10:03:56 AM
If there was ever any doubt that US doesn't read the "Suggestions" thread on what sabers they should make, then put those doubts to rest. It looks utterly amazing, the many people asking for a Kanan saber are in some serious luck.


Title: Re: New Saber: Spectre
Post by: Samhain138 on July 30, 2018, 10:51:11 AM
This ones a hit with me!  Wish I could visit an US both and see how this one handles!


Title: Re: New Saber: Spectre
Post by: imgumby001dammit on July 30, 2018, 05:28:50 AM
I am sooooo tempted to max out my credit card right now...


Title: Re: New Saber: Spectre
Post by: RedMileJedi on July 30, 2018, 01:13:01 PM
Wow! I haven't been around here much in the last year but I keep on getting the emails and keeping up-to-date that way.

Well...just when I thought I was out, Deep pulls me back in with this beauty! (I'm not upset)

Ordering today!


Title: Re: New Saber: Spectre
Post by: Infinit01 on July 30, 2018, 01:36:03 PM
Tempted to order it now but have a build for the raffle so it's between those two..


Title: Re: New Saber: Spectre
Post by: Lord Sidious on July 30, 2018, 07:07:04 AM
Very nice! 10/10


Title: Re: New Saber: Spectre
Post by: DarthBoneTD on July 30, 2018, 02:08:43 PM
What better way to enter the raffle, what do ya'll think SY w/ FO, or DVA w/Silver? After placing in the last two raffles, I feel "obligated" to enter at least 2 more. I'm just torn between this and my Catalyst, a saber that has been on my wishlist since the beginning. This is just so different from there other sabers, it's a must. Just found out the wife is pregnant so I can't have both I guess?


Title: Re: New Saber: Spectre
Post by: Infinit01 on July 30, 2018, 03:19:51 PM
Iím leaning towards the SY.  Been wanting one in that color and I think itíll look sweet


Title: Re: New Saber: Spectre
Post by: Stone37 on July 30, 2018, 03:26:47 PM
NEED!

I don't own a saber with flash on clash, and this will be the first. Do I go with Guardian Blue or Arctic Blue with Silver flash on clash? The videos I've found are not giving me a good comparison. HELP!


Title: Re: New Saber: Spectre
Post by: Zren Tobas on July 30, 2018, 03:32:40 PM
Gonna try and go for one this week =] Tempted to also get an extra pommel with the d-ring for my Dark Sentinel as well :P


Title: Re: New Saber: Spectre
Post by: Death Cyborg on July 30, 2018, 09:53:24 AM
That is a beautiful piece ! You nailed the look and feel of the inspiration !
I'm saving for a down payment on a home so on to the want list it goes !
I'm thinking stunt, AS (no flash) with a UE HG blade.


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on July 30, 2018, 11:48:55 AM
This went on my wishlist immediately.  Beautiful looking saber, I suspect it will be a great seller.


Title: Re: New Saber: Spectre
Post by: Darth Davester on July 30, 2018, 07:09:58 PM
I am sooooo tempted to max out my credit card right now...

(https://i.imgur.com/Q2lf8Uw.jpg)


Title: Re: New Saber: Spectre
Post by: Therion Jinn on July 30, 2018, 07:57:04 PM
This is definitely a beautiful hilt.
Hoping they have it with them at Fan-X in September. I want to see it up close


Title: Re: New Saber: Spectre
Post by: Taegin Roan on July 30, 2018, 08:04:13 PM
Wow, what a great job Ultrasabers, once again. I think it would look great in either SY or an Orange. :D

EDIT:
I've decided I need two. One a Kanan replica (as close as can be anyways), and one with everything else.  ;D


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on July 30, 2018, 01:46:40 PM
And then you can show us what the staff would look like!


Title: Re: New Saber: Spectre
Post by: StoryDtechtive on July 30, 2018, 11:13:56 PM
Planning to get a nice high end saber with sound over the next couple of months, but the choices are getting harder and and harder. This one definitely goes on my future list regardless. It looks amazing!


Title: Re: New Saber: Spectre
Post by: hazard502 on July 31, 2018, 03:47:06 PM
The circuitry is too busy for my tastes so it'd have to be the black hilt body, no windows, square box and in a Tri-LED of some kind; prob GB  8)


Title: Re: New Saber: Spectre
Post by: Duff Man on July 31, 2018, 07:00:52 PM
Does this mean you will be adding D-ring hooks to the accessories page,  now that there are two models with D-rings?


Title: Re: New Saber: Spectre
Post by: Zren Tobas on July 31, 2018, 08:14:00 PM
A d-ring Overlord pommel would be sweet :P


Title: Re: Re: New Saber: Spectre
Post by: tx_tuff on August 01, 2018, 03:48:07 AM
Does this mean you will be adding D-ring hooks to the accessories page,  now that there are two models with D-rings?
This would be nice.

Sent from my XT1650 using Tapatalk



Title: Re: New Saber: Spectre
Post by: naeblis on August 01, 2018, 05:01:54 AM
Wow, what a great job Ultrasabers, once again. I think it would look great in either SY or an Orange. :D

EDIT:
I've decided I need two. One a Kanan replica (as close as can be anyways), and one with everything else.  ;D

Yes, most definitely two (at least)....even just for the two different handles....This saber is beautiful!


Title: Re: New Saber: Spectre
Post by: GeddaTheHutt on August 01, 2018, 10:46:07 PM
Another beautiful looking saber. If only I wasn't a poor uni student.


Title: Re: New Saber: Spectre
Post by: JdiKnhtJMH on August 01, 2018, 11:25:39 PM
Amazing work! Can't wait to see one of these in person!


Title: Re: New Saber: Spectre
Post by: TR-77477 on August 02, 2018, 02:26:36 PM
Thank you Thank you, I will take all the credit for this saber, since I did put it in the wish list thread a couple years ago.  ::) ::) I have been waiting for this saber for ever. I was on the fence as if I would get in this raffle. Well my decision was made for me. I'm thinking Fire orange...


Title: Re: New Saber: Spectre
Post by: Taegin Roan on August 02, 2018, 07:49:05 PM
Thank you Thank you, I will take all the credit for this saber, since I did put it in the wish list thread a couple years ago.  ::) ::) I have been waiting for this saber for ever. I was on the fence as if I would get in this raffle. Well my decision was made for me. I'm thinking Fire orange...

If you go FO, you need to post pics (doesn't matter what color you go with, you need to post pics), but especially FO. I want to see this combo so bad.


Title: Re: New Saber: Spectre
Post by: mongoose on August 03, 2018, 05:08:37 AM
Well....i guess i know what my next saber is gonna be.


Title: Re: New Saber: Spectre
Post by: Charlemagne on August 04, 2018, 01:51:52 AM
It is so gorgeous!


Title: Re: New Saber: Spectre
Post by: TR-77477 on August 04, 2018, 04:46:58 AM
Well I bit the bullet or blaster bolt and ordered one. In Fire orange... I hope the one I get is in the darker part of the orange spectrum.  ( I have ordered a couple FO in the past and one is a noticeably darker shade.)


Title: Re: New Saber: Spectre
Post by: revenantdsm on August 05, 2018, 02:23:35 PM
Beautiful- how wide is the grip onn these sabers? I have a smaller hand, and the Lost Gray is a bit too wide, but the Flamberge is almost right...



Title: Re: New Saber: Spectre
Post by: hazard502 on August 06, 2018, 03:43:35 PM
Beautiful- how wide is the grip onn these sabers? I have a smaller hand, and the Lost Gray is a bit too wide, but the Flamberge is almost right...

I also have the Lost Grey and Flamberge, great weapons :) According to the US website, hilt diameters are:

Lost Grey - 1.6"
Flamberge - 1.5"
Spectre - 1.5"


Title: Re: New Saber: Spectre
Post by: BatMike90 on August 07, 2018, 01:31:05 AM
If you go FO, you need to post pics (doesn't matter what color you go with, you need to post pics), but especially FO. I want to see this combo so bad.

Agreed!


Title: Day to become Keinan !!
Post by: Lesan on August 07, 2018, 06:46:00 AM
  This item is what the fans of "Rebels" have been waiting for ! It is also good to look like a cis when you sculpture !! ;D


Title: Re: New Saber: Spectre
Post by: JarkaRuus on August 07, 2018, 07:59:23 AM
Sexy!


Title: Re: New Saber: Spectre
Post by: Infinit01 on August 07, 2018, 09:27:45 AM
I also have the Lost Grey and Flamberge, great weapons :) According to the US website, hilt diameters are:

Lost Grey - 1.6"
Flamberge - 1.5"
Spectre - 1.5"

Thanks for the diameter info, hazard.  I was told that the Flamberge is pretty comfortable to wield and I'm glad that the Spectre's diameter is the same.   Point.


Title: Re: New Saber: Spectre
Post by: hazard502 on August 07, 2018, 05:22:54 PM
Thanks for the diameter info, hazard.  I was told that the Flamberge is pretty comfortable to wield and I'm glad that the Spectre's diameter is the same.   Point.

Welcome, and point in return :)


Title: Re: New Saber: Spectre
Post by: DizB on August 07, 2018, 07:55:33 PM
I bit the bullet and ordered one last week.  And as usual, amazingly fast service, it arrived in UPS today!  No pics yet but this thing is gorgeous!  I got the etched circuit hilt.  Was skeptical at first but in person it really works. Love the windowed emitter, D-Ring is perfect. Only other comment (not a critism), this saber is ... large.  Very large. But it has a wonderful balance to it.  I plant to carry it with me to a Rebel Legion trooping event soon.

For the curious, it is Consular Green (first CG we had had) with MLS QR emitter, FOC SD, Premium Sound.  Really a beautiful piece.

Great job Ultra Sabres!


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on August 08, 2018, 11:06:22 AM
Would really like to see a pic as I am curious how the Spectre looks in Consular Green. 


Title: Re: New Saber: Spectre
Post by: DarthBoneTD on August 08, 2018, 01:20:17 PM
Just jumped in the raffle with this one. Got it in SY/FO with engraving/ ob4/ d-ring/ Angled box w/ silver switch/ and windows. Threw in mystery box for good measure. Now the wait begins


Title: Re: New Saber: Spectre
Post by: BatMike90 on August 08, 2018, 02:59:42 PM
Would really like to see a pic as I am curious how the Spectre looks in Consular Green. 

As would I , along with Blazing Red.


Title: Re: New Saber: Spectre
Post by: Taegin Roan on August 08, 2018, 07:21:41 PM
Just jumped in the raffle with this one. Got it in SY/FO with engraving/ ob4/ d-ring/ Angled box w/ silver switch/ and windows. Threw in mystery box for good measure. Now the wait begins

Basically the setup I'd get for my 'non-cannon' version. Definitely will get it in SY though.


Title: Re: New Saber: Spectre
Post by: DizB on August 08, 2018, 08:31:05 PM
As would I , along with Blazing Red.

If we can wait till this weekend Iíll take a picture and post it.   :)


Title: Re: New Saber: Spectre
Post by: Critias on August 09, 2018, 07:36:42 PM
The Spectre is gorgeous, and what finally pushed me over the edge and convinced me to make a purchase.  I can't think of a better welcome into the wide world of custom lightsabers.  :)


Title: Re: New Saber: Spectre
Post by: TR-77477 on August 11, 2018, 04:54:51 AM
I will post mine when I get it. I plan (as always) to make a few modifications to make it "mine" but I will have to wait until I get it to decide what.


Title: Re: New Saber: Spectre
Post by: MandaloriansPride on August 13, 2018, 07:28:10 PM
I can't wait to get mine, should ship any time now!

[Choose Your Configuration: Premium Obsidian Sound]
[Choose the color of your blade!: Sun Rider's Destiny]
[Flash on Clash: No Flash]
[Battery Configuration: Li-Ion Setup with BuckPuck (Batteries Included *ONLY*)]
[Recharge Port: No Recharge Port]
[Blade Length: 32" Length]
[Blade Option: UltraEdge Midgrade]
[Spectre Emitter Type: WITH Windows]
[Spectre Emitter Covertec Wheel: Add Covertec Wheel To The Emitter]
[Spectre Body Type: WITH Engraving Pattern]
[Spectre Pommel Type: WITH D-Ring]
[Spectre Activation Box: Angled Activation Box]
[Switch Type: Silver Non-Illuminated AV Switch]
[Quick Disconnect: Nope.]
[Sound: Obsidian USB V4 Sound! [V4]]
[Choose Blade Tip Type: Round Tip]
[Blade Retention Screw Wrench: Sure!]
[Include Blade Plug: Standard Plug]
[Include Saber Stand: No Thanks]
[Include MINI USB Cable: No Thanks]
[Include Covertec Clip: Yes!]


Title: Re: New Saber: Spectre
Post by: Darth Davester on August 13, 2018, 10:53:23 PM
I can't wait to get mine, should ship any time now!

[Choose Your Configuration: Premium Obsidian Sound]
[Choose the color of your blade!: Sun Rider's Destiny]
[Flash on Clash: No Flash]
[Battery Configuration: Li-Ion Setup with BuckPuck (Batteries Included *ONLY*)]
[Recharge Port: No Recharge Port]
[Blade Length: 32" Length]
[Blade Option: UltraEdge Midgrade]
[Spectre Emitter Type: WITH Windows]
[Spectre Emitter Covertec Wheel: Add Covertec Wheel To The Emitter]
[Spectre Body Type: WITH Engraving Pattern]
[Spectre Pommel Type: WITH D-Ring]
[Spectre Activation Box: Angled Activation Box]
[Switch Type: Silver Non-Illuminated AV Switch]
[Quick Disconnect: Nope.]
[Sound: Obsidian USB V4 Sound! [V4]]
[Choose Blade Tip Type: Round Tip]
[Blade Retention Screw Wrench: Sure!]
[Include Blade Plug: Standard Plug]
[Include Saber Stand: No Thanks]
[Include MINI USB Cable: No Thanks]
[Include Covertec Clip: Yes!]

That's exactly how I would configure mine, although I would spring for the quick disconnects. I'd like to have the option to change colors.

Good choice and have a point!


Title: Re: New Saber: Spectre
Post by: MandaloriansPride on August 14, 2018, 05:31:44 AM
That's exactly how I would configure mine, although I would spring for the quick disconnects. I'd like to have the option to change colors.

Good choice and have a point!

I plan to install Quick Disconnects myself. I started installing them on all of our sabers after I modified a Arbiter that we got in a Mystery Box a few months ago. I started installing them all before getting any extra LEDs from US and when I did order one that had QD installed, discovered that I had installed the connectors the opposite of how US does it. So instead of going back and redoing all of my work, I just get my new sabers without them and install it myself.


Title: Re: New Saber: Spectre
Post by: Carrionlord on August 14, 2018, 05:54:03 AM
I can't wait to get mine. I ordered it in GB with BR FoC, Premium sound, windows, circuit board, angled with silver switch. I just ordered it last week and it'll ship once the raffle winners are announced. I'm excited for this saber!


Title: Re: New Saber: Spectre
Post by: Darth Davester on August 14, 2018, 10:24:04 AM
I plan to install Quick Disconnects myself. I started installing them on all of our sabers after I modified a Arbiter that we got in a Mystery Box a few months ago. I started installing them all before getting any extra LEDs from US and when I did order one that had QD installed, discovered that I had installed the connectors the opposite of how US does it. So instead of going back and redoing all of my work, I just get my new sabers without them and install it myself.

Nice!

Do you have a part number for the JST connectors that you and US uses?


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on August 14, 2018, 10:37:28 AM
Carrion that sounds sweet, during lockup that color choice is going to be really awesome!


Title: Re: New Saber: Spectre
Post by: Asuan on August 17, 2018, 10:15:34 AM
Really for me its the Emitter itself I want.  But it doesn't seem to be for sale separately.  BTW  Can anyone fill me in on what Mass Effect has to do with this? Not knowledgeable of that franchise

Not sure where you are getting the shole mass Effect thing from unless you are talking about the name of the saber.  Spectre is the name of the crew from Star Wars Rebels... I only figure that is what it had to be because my husband plays Mass Effect quite a bit.


Title: Re: New Saber: Spectre
Post by: Critias on August 23, 2018, 02:03:15 AM
Not sure where you are getting the shole mass Effect thing from unless you are talking about the name of the saber.  Spectre is the name of the crew from Star Wars Rebels... I only figure that is what it had to be because my husband plays Mass Effect quite a bit.
"Spectres" are also a type of special soldier/hero/diplomat/whatever in the Mass Effect universe.  "Spectre #" was the callsign system in Rebels also, but that's the Mass Effect tie-in.


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on August 23, 2018, 09:24:09 PM
Thanks for clearing that up, I don't play Mass Effect so I too was wondering what Deep was talking about.


Title: Re: New Saber: Spectre
Post by: Infinit01 on August 24, 2018, 05:08:18 AM
"Spectres" are also a type of special soldier/hero/diplomat/whatever in the Mass Effect universe.  "Spectre #" was the callsign system in Rebels also, but that's the Mass Effect tie-in.

Critias is on point with that one.  Point.


Title: Re: New Saber: Spectre
Post by: Darth Tepes on August 24, 2018, 05:29:39 AM
Not sure where you are getting the shole mass Effect thing from unless you are talking about the name of the saber.  Spectre is the name of the crew from Star Wars Rebels... I only figure that is what it had to be because my husband plays Mass Effect quite a bit.

in the video for the Spectre, Emory mentions Mass Effect in terms of the name


Title: Re: New Saber: Spectre
Post by: Carrionlord on August 26, 2018, 04:40:01 PM
I made a short video of the Spectre and my grand prize winnings https://youtu.be/KJT9-9f3QTU


Title: Re: New Saber: Spectre
Post by: Gunner on September 05, 2018, 09:52:42 AM
I just watched your video that's great Carrion. Congratulations on the win !! I also had a Spectre as my raffle entry (http://[URL=http://s350.photobucket.com/user/6gunnerace/media/IMG_20180829_104435_zps7n6usrkm.jpg.html][IMG]http://i350.photobucket.com/albums/q414/6gunnerace/IMG_20180829_104435_zps7n6usrkm.jpg)[/URL][/img]


Title: Re: New Saber: Spectre
Post by: Gunner on September 05, 2018, 10:25:26 AM
(https://www.dropbox.com/s/k3t9pcf6n5xv8rx/IMG_20180823_160323.jpg?dl=0)


Title: Re: New Saber: Spectre
Post by: Dude on September 08, 2018, 02:10:48 PM
Recieving mine thursday. Looking forward to see how well they constructed that lightsaber  :) ;)  ..


Title: Re: New Saber: Spectre
Post by: MandaloriansPride on September 12, 2018, 02:11:44 PM
Just got my "Forum" Sentinel Yellow LED for my Spectre.

(https://i.imgur.com/AXvzBBk.jpg)

Pretty nice.


Title: Re: New Saber: Spectre
Post by: Infinit01 on September 12, 2018, 02:53:14 PM
Looking good there, MP


Title: Re: New Saber: Spectre
Post by: SpiffyPython on September 12, 2018, 03:34:33 PM
It was this model that lead me down this path Iím now very happily traveling on. Came across the YouTube video by Emory and pretty much ordered one straight after that. Went the hole hog and got it with a diamond card as well. Love everything about it, balance is amazing build quality is stunning, really love all the detailed work with the circuit board effect on the hilt.

Have also set one of the memory slots for white light and no sound, so I have a very cool torch 😀


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on September 12, 2018, 04:18:34 PM
That is one of the best examples of SY I have seen MP, great looking saber there!


Title: Re: New Saber: Spectre
Post by: Therion Jinn on September 12, 2018, 07:43:14 PM
Nice look for the Sentinel


Title: Re: New Saber: Spectre
Post by: Malik Thanewulf on September 14, 2018, 07:59:54 PM
I have to agree,  that SY is very nice. O love my DVA. If anyone is still on the fence about the Spectre, GO FOR IT! You won't be disappointed. Quick note: I love the engraved feel of the circuitry pattern on the hilt. You can actually feel it, it gives the whole Hilt a sort of texture that is actually rather impressive. Wasn't expecting that but I'm very happy to find this little detail. It adds so much more depth to the Spectre.


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on September 14, 2018, 10:25:23 PM
I feel the same way about the engraving on my reapers, I'm going to have to get my hands on a Spectre at the US booth during the upcoming Fandemic con here in Houston.  Can't wait to see it up close and handle that bad boy.


Title: Re: New Saber: Spectre
Post by: Fineadditionlocated on September 15, 2018, 06:15:05 PM
What is the inspired source of the Spectre?


Title: Re: New Saber: Spectre
Post by: scifidude79 on September 15, 2018, 06:18:37 PM
What is the inspired source of the Spectre?


Kanan Jarrus from Star Wars: Rebels.

http://starwars.wikia.com/wiki/Kanan_Jarrus (http://starwars.wikia.com/wiki/Kanan_Jarrus)

His ship is the Ghost, and Spectre is a play on that name.


Title: Re: New Saber: Spectre
Post by: Saso Is-kor on September 15, 2018, 07:01:44 PM
What is the inspired source of the Spectre?


Kanan Jarrus from Star Wars: Rebels.

[url]http://starwars.wikia.com/wiki/Kanan_Jarrus[/url] ([url]http://starwars.wikia.com/wiki/Kanan_Jarrus[/url])

His ship is the Ghost, and Spectre is a play on that name.


In addition, Kanan's call sign is "Spectre-1". Interesting that Hera is really the leader of the cell, but that he's #1 to confuse who the leader is, at least that's what I've read.


Title: Re: New Saber: Spectre
Post by: scifidude79 on September 15, 2018, 07:18:16 PM
Ah yes, I forgot they used the Spectre call signs.


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on September 16, 2018, 05:54:55 PM
I did get my hands on the Spectre at the US booth today, the engraving on the hilt feels even better than I thought, very intricate and unique tactile experience.  Also the hilt is not as heavy as expected and is comfortable as both a single and double handed saber.  Seeing various ones up close, I prefer the windowed and etched versions over any of the other variants.


Title: Re: New Saber: Spectre
Post by: Saso Is-kor on September 16, 2018, 06:26:08 PM
I did get my hands on the Spectre at the US booth today, the engraving on the hilt feels even better than I thought, very intricate and unique tactile experience.  Also the hilt is not as heavy as expected and is comfortable as both a single and double handed saber.  See various ones up close, I prefer the windowed and etched versions over any of the other variants.

Glad to hear it isn't so heavy, watching the first unveiling video I thought it was a prime contender for their heaviest hilt. It just looks so meaty.


Title: Re: New Saber: Spectre
Post by: Infinit01 on September 16, 2018, 06:28:20 PM
I like the windowed emitter and I like the look of the etched body but I wouldn't own it in the etched body, just the windowed emitter.


Title: Re: New Saber: Spectre
Post by: Malik Thanewulf on September 16, 2018, 07:03:11 PM
For those of you who've held and Emperor's hand. Remember when you first saw it and you thought that is a really large beefy looking saber? You thought it would have quite a bit of heft to it and it turned out, it was very lightweight and evenly balanced. The Spectre is the same. Looks like a beast, handles like a dream. And there's almost no real weight to it. Well, actually enough to make you feel like you're holding a saber without having to work too hard to wield a saber. Stop considering it and go for it. You WILL BE HAPPY WITH IT.


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on September 16, 2018, 07:08:52 PM
Glad to hear it isn't so heavy, watching the first unveiling video I thought it was a prime contender for their heaviest hilt. It just looks so meaty.

Yeah it is nowhere near the weight of a Mantis or Malice those are some monsters (but I do like them), I think it is around the same weight class as a Guardian or Emperor's hand.  To me it is a comfortable weight that gives that real weapon feel like my Reaper.  Of course blade grade and length can vary how it overall feels.  I think I would personally go with a midgrade 32" blade for a Spectre but that is just me.

HA, Malik I was just writing this response when I saw yours, I agree completely very similar to the Emperor's hand type with this Spectre!


Title: Re: New Saber: Spectre
Post by: Infinit01 on September 17, 2018, 04:14:45 AM
I think it is around the same weight class as a Guardian or Emperor's hand.

Good to know, Edon.  Thanks for the comparison, I have an EH so it gives me a good feel for the weight of the Spectre. Point.


Title: Re: New Saber: Spectre
Post by: TR-77477 on September 17, 2018, 05:41:27 AM
Here is my custom painted Spectre, I really love this saber it is well balanced and feels great in the hand.

(http://i1376.photobucket.com/albums/ah3/veeds98/41455733_1524929670942099_4261839745094516736_n1_zps4yczat6b.jpg)


Title: Re: New Saber: Spectre
Post by: DarthBoneTD on September 17, 2018, 06:03:46 AM
Well done TR, I have to ask, how did you get that shroud off? The only way I see is to somehow remove the electrical pins. Any suggestions on how to do it? -1


Title: Re: New Saber: Spectre
Post by: Infinit01 on September 17, 2018, 07:42:52 AM
I keep coming back to look at that lovely weathered black look with the FO peeping through the windows, have another point TR.


Title: Re: New Saber: Spectre
Post by: Stone37 on September 17, 2018, 11:43:08 AM
I actually weigh the Spectre and compare its weight to other popular US sabers in my video review of it:
http://www.saberforum.com/index.php?topic=39585.0 (http://www.saberforum.com/index.php?topic=39585.0)

Compared to many of the US sabers, this thing is a beast and is twice as heavy as the Prophecy for example.


Title: Re: New Saber: Spectre
Post by: naeblis on September 17, 2018, 11:51:15 AM
I actually weigh the Spectre and compare it weight to other popular US sabers in my video review of it:
[url]http://www.saberforum.com/index.php?topic=39585.0[/url] ([url]http://www.saberforum.com/index.php?topic=39585.0[/url])

Compared to many of the US sabers, this thing is a beast and is twice as heavy as the Prophecy for example.
  The prophecy is considerably smaller, though...so that makes sense.  I have the Dark Prophecy, and there is quite a bit of difference in overall feel.  I used to fight with broadswords so the overall feel of the Spectre is really good for me....Emperor's hand as well. 


Title: Re: New Saber: Spectre
Post by: Stone37 on September 17, 2018, 12:03:33 PM
  The prophecy is considerably smaller, though...so that makes sense.  I have the Dark Prophecy, and there is quite a bit of difference in overall feel.  I used to fight with broadswords so the overall feel of the Spectre is really good for me....Emperor's hand as well. 

I agree! I have practiced and competed in Iaido for over 20 years. The Katana is lighter than an English broadsword, but is still has very real weight to it. This is what I love about the Spectre. It has the weight of an actual sword.


Title: Re: New Saber: Spectre
Post by: MandaloriansPride on September 17, 2018, 12:06:35 PM
After seeing one a few of the first videos on it, I was expecting it to be too big, but I am perfectly happy with the Spectre. We got 2 one with the etching for myself and my son has one in the black. They're both beautiful.


Title: Re: New Saber: Spectre
Post by: TR-77477 on September 17, 2018, 04:54:32 PM
Well done TR, I have to ask, how did you get that shroud off? The only way I see is to somehow remove the electrical pins. Any suggestions on how to do it? -1

The electrical pins are pressure fit into the hilt. To remove them I heated up the hilt so that the aluminum would expand more than a Pin. Then worked the pin out  I will be putting it back in the same way.


Title: Re: New Saber: Spectre
Post by: DarthBoneTD on September 17, 2018, 05:14:06 PM
Very interesting and informative, I'm going to give it a whirl this weekend. Thanks for the advice -1


Title: Re: New Saber: Spectre
Post by: bigBear on September 17, 2018, 06:16:21 PM
Yeah it is nowhere near the weight of a Mantis or Malice those are some monsters (but I do like them), I think it is around the same weight class as a Guardian or Emperor's hand.  To me it is a comfortable weight that gives that real weapon feel like my Reaper.  Of course blade grade and length can vary how it overall feels.  I think I would personally go with a midgrade 32" blade for a Spectre but that is just me.

HA, Malik I was just writing this response when I saw yours, I agree completely very similar to the Emperor's hand type with this Spectre!

yes, I own the malice and everyone in group calls it "the beast" mantis don't compare in weight. so still heavy weight champ the Malice! lol


Title: Re: New Saber: Spectre
Post by: Chance on September 23, 2018, 09:04:27 PM
I really want this to be my next saber..... Gorgeous.


Title: Re: New Saber: Spectre
Post by: hazard502 on September 23, 2018, 10:09:57 PM
A big shout out to you guys who've given quality feedback about this lightsaber - size, weight, and usability. And backed by some training and experience with other weapons. Kudos to you guys and thanks.


Title: Re: New Saber: Spectre
Post by: Kazuto on September 25, 2018, 11:15:22 PM
Just a thought on the product, when you think of the Spectre what color blade comes to mind?


Title: Re: New Saber: Spectre
Post by: Infinit01 on September 26, 2018, 04:17:54 AM
Just a thought on the product, when you think of the Spectre what color blade comes to mind?

Just for me, it's either AB or SY when I think of the Spectre.  How about yourself, Kazuto?


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on September 26, 2018, 08:29:45 AM
I got it in SRD with AB FOC with V4 sound on my wishlist.


Title: Re: New Saber: Spectre
Post by: Infinit01 on September 26, 2018, 08:34:29 AM
I got it in SRD with AB FOC with V4 sound on my wishlist.

SRD with AB FoC is one of my favorite combos. I look forward to seeing it when you buy it.


Title: Re: New Saber: Spectre
Post by: Kazuto on September 26, 2018, 10:56:13 AM
Just for me, it's either AB or SY when I think of the Spectre.  How about yourself, Kazuto?
I was thinking DVA, or SY but I haven't been sure, I'm saving SB for my butcher cause I think the blue and silver one with AB would be very Ravenclawy.


Title: Re: New Saber: Spectre
Post by: Malik Thanewulf on September 26, 2018, 11:45:54 AM
My Spectre is in DVA, and I have to say, it is pretty cool. With a 32 in blade, it is perfectly balanced. It's also very comfortable to spin and wield,  especially when I use a heavier strike against an opponent. I do feel like I have a real sword in my hands. If you're thinking about getting it, stop thinking about it and go for it.


Title: Re: New Saber: Spectre
Post by: digitalsithlord on September 26, 2018, 01:25:42 PM
I picked one of these up at DragonCon this year and will say I was pleasantly surprised that it was not as bulky as it seems to be in online pics.  I went with the basic, no windows or tech engravings, with my first every Arctic Blue blade with silver FOC.  The tech engraving was just too aggressive for my taste, but I absolutely love this hilt.  As stated earlier, this does feel like somewhat of a sword in the hands and the handguard is a nice addition.  I also was fortunate enough to get the angled box activation switch and not the square.  This was a purchase I did not think I was going to make until I saw it.  It did not have a recharge port, which I still want, so I will have to send it back in.  I did LOVE that this came with both a D-ring and cover-tech wheel on the hilt.  This saber could absolutely be Jedi or Sith easily.  I love my set-up and I love the plain black grip area of the hilt as well.  Sometimes plain is just fine.  This is a awesome lightsaber that I will highly recommend that you get, you will NOT regret it that is for sure!


Title: Re: New Saber: Spectre
Post by: StarWarsFan626 on September 26, 2018, 03:32:49 PM
AWESOME!!!!!! Waited forever for this saber. Love it!   


Title: Re: New Saber: Spectre
Post by: Rashimotosan on September 26, 2018, 06:45:48 PM
After seeing one a few of the first videos on it, I was expecting it to be too big, but I am perfectly happy with the Spectre. We got 2 one with the etching for myself and my son has one in the black. They're both beautiful.

Which do you prefer? I've actually been torn between the etching and no etching. On one hand I like the classic look, on the other hand, the etching is a great chance to get a saber that looks really unique. I have to say though I really just like the basic black and am leaning toward it. The etching looks a little too busy for me. I just don't know lol


Title: Re: New Saber: Spectre
Post by: Infinit01 on September 26, 2018, 07:12:35 PM
Which do you prefer? I've actually been torn between the etching and no etching. On one hand I like the classic look, on the other hand, the etching is a great chance to get a saber that looks really unique. I have to say though I really just like the basic black and am leaning toward it. The etching looks a little too busy for me. I just don't know lol

Although the etching looks really cool, my build for it is without as it looks better to me with the main body not being as busy since thereís already a shroud covering most of it.  Itís just me though but I like how it looks without, it doesnít draw attention away from the rest of the hilt like it would with the etching in my opinion


Title: Re: New Saber: Spectre
Post by: Rashimotosan on September 26, 2018, 07:32:02 PM
Yeah that's what I thought. At the same time what are the chances to get something with that kind of design. I guess I'm only considering it as it's a design option the other guys don't really have so it makes it stand out more uniquely. But personally I guess I'm just old fashioned. I own a lot of black and just love a plain black look.

Do you have photos of it somewhere on here Infinit? Curious to see what your setup looks like.


Title: Re: New Saber: Spectre
Post by: Infinit01 on September 26, 2018, 07:48:32 PM
Yeah that's what I thought. At the same time what are the chances to get something with that kind of design. I guess I'm only considering it as it's a design option the other guys don't really have so it makes it stand out more uniquely. But personally I guess I'm just old fashioned. I own a lot of black and just love a plain black look.

Do you have photos of it somewhere on here Infinit? Curious to see what your setup looks like.


I have t ordered mine yet so it currently lives in my wishlist.  My bad, I should of been more specific and I apologize for that.
 

Here is one from one of the members on here:

http://i.imgur.com/ngF4rDG_d.jpg?maxwidth=640&shape=thumb&fidelity=medium (http://i.imgur.com/ngF4rDG_d.jpg?maxwidth=640&shape=thumb&fidelity=medium)


Title: Re: New Saber: Spectre
Post by: Malik Thanewulf on September 26, 2018, 10:52:47 PM
O felt the same way at 1st. When I placed my order, I opted for the unique look of the etched pattern.  Realtalk, I think this is my new favorite saber. It's like nothing else I own. And the feel of the etched hilt is pretty cool. It actually helps me grip the hilt better. See for yourself.
https://i.imgur.com/H93gZiv.jpg

I may still get the black hilt as well.


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on September 27, 2018, 06:46:32 AM
Malik, that is pretty much exactly the setup I want too.


Title: Re: New Saber: Spectre
Post by: Rashimotosan on September 27, 2018, 07:45:34 AM
O felt the same way at 1st. When I placed my order, I opted for the unique look of the etched pattern.  Realtalk, I think this is my new favorite saber. It's like nothing else I own. And the feel of the etched hilt is pretty cool. It actually helps me grip the hilt better. See for yourself.
https://i.imgur.com/H93gZiv.jpg

I may still get the black hilt as well.

Sweet!  :o That's actually the setup I wanted as well if I did go with the etching. Huh. So it might even improve the grip somewhat? After digging around I have seen others on the forum talk about how beautiful it is in person. I feel like that with the Guardian I just got. On screen I didn't think it was that impressive even though other reviewers had said the hilt was gorgeous in person. Now I that I have it, I see the appeal. Now I'm back to being on the fence with the Spectre engraving lol


Title: Re: New Saber: Spectre
Post by: Malik Thanewulf on September 27, 2018, 11:34:01 AM
so you have the Manticore right? so feel the black part of that saber. that's what the smooth black Spectre handle feels like. the engraved hilt gives a textured feel to it.


Title: Re: New Saber: Spectre
Post by: Infinit01 on September 27, 2018, 11:40:34 AM
so you have the Manticore right? so feel the black part of that saber. that's what the smooth black Spectre handle feels like. the engraved hilt gives a textured feel to it.

Good to know, that may change things but I do like the simplicity of the all black grip


Title: Re: New Saber: Spectre
Post by: Malik Thanewulf on October 08, 2018, 11:13:14 AM
Sounds to me like you both have made up your mind then. The etching is incredible I have to say. But it sounds to me as if the force and your heart are leading you both to the cleaner black finish. Problem solved. If your like me, the only thing  left to do now, is to save up the funds so that you can equip it the way you want to. Get this saber. Speaking as someone who owns and loves it, I can without a doubt, I wholeheartedly say, You will not regret it.


Title: Re: New Saber: Spectre
Post by: HanSolo Voltron on November 18, 2018, 01:49:21 PM
This one nearly made me stray from my decision to get a Chosen One.  I get the feeling my wishlist is going to get pretty long...


Title: Re: New Saber: Spectre
Post by: Kazuto on November 18, 2018, 08:54:56 PM
This one nearly made me stray from my decision to get a Chosen One.  I get the feeling my wishlist is going to get pretty long...
As an owner of the Spectre, it is amazing.


Title: Re: New Saber: Spectre
Post by: HanSolo Voltron on November 18, 2018, 02:06:18 PM
As an owner of the Spectre, it is amazing.
   

I bet.  One of my good friends has been asking me about where to get a saber and I pointed him to the Spectre.  For me, I guess there's always next Christmas...


Title: Re: New Saber: Spectre
Post by: Therion Jinn on November 18, 2018, 02:11:38 PM
This one nearly made me stray from my decision to get a Chosen One.  I get the feeling my wishlist is going to get pretty long...
Welcome to the club on long wishlists


Title: Re: New Saber: Spectre
Post by: Lady Revan on November 18, 2018, 09:23:36 PM
This one nearly made me stray from my decision to get a Chosen One.  I get the feeling my wishlist is going to get pretty long...

Spectre was my raffle entry order. Waiting for it to come now. Wish lists are wonderful things. US even lets you customize sabers, save them to your wish list, and then add directly from wish list to cart when youíre ready.


Title: Re: New Saber: Spectre
Post by: Infinit01 on November 19, 2018, 05:18:51 AM
Spectre was my raffle entry order. Waiting for it to come now. Wish lists are wonderful things. US even lets you customize sabers, save them to your wish list, and then add directly from wish list to cart when youíre ready.

Agreed, I just wish that you can re-edit the saber or save over it with a new build.


Title: Re: New Saber: Spectre
Post by: Rashimotosan on November 19, 2018, 09:49:43 AM
Agreed, I just wish that you can re-edit the saber or save over it with a new build.

Same! Put that in suggestions! Lol


Title: Re: New Saber: Spectre
Post by: Infinit01 on November 19, 2018, 10:40:42 AM
Done.


Title: Re: New Saber: Spectre
Post by: Malik Thanewulf on November 19, 2018, 07:48:56 PM
Lady Revan, the Spectre is way cool. The pictures and videos don't do it justice. It is easily one of my favorites. (Emperor's Hand/Spectre tied for 1st place) you WILL LOVE IT. Did you get the etched pattern or straight black?


Title: Re: New Saber: Spectre
Post by: Dark Path Media on November 21, 2018, 08:29:46 PM
I loved this saber from the moment I first saw it.

I recently declared mine "The Sword of Metallica"  :)

(http://www.youtube.com/watch?v=tl32obb9ei0&t=43s#)


Title: Re: New Saber: Spectre
Post by: bigBear on November 21, 2018, 08:44:08 PM
I loved this saber from the moment I first saw it.

I recently declared mine "The Sword of Metallica"  :)

([url]http://www.youtube.com/watch?v=tl32obb9ei0&t=43s#[/url])




ok, that is quite the soundfont. great saber and great band. I approve!


Title: Re: New Saber: Spectre
Post by: Dark Path Media on November 21, 2018, 08:46:44 PM

ok, that is quite the soundfont. great saber and great band. I approve!
I agree on both accounts bigBear :)


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on November 24, 2018, 10:03:56 AM
Spectacular Specter Setup, DPM!  :o


Title: Re: New Saber: Spectre
Post by: ImmortalJedi on December 20, 2018, 10:56:37 PM
Awesome look! Can't wait to buy one! (Just need some money first Lol)  ;)


Title: Re: New Saber: Spectre
Post by: Dark Path Media on December 21, 2018, 09:42:07 PM
Spectacular Specter Setup, DPM!  :o

Thanks Edon Bluewolf :)


Title: Re: New Saber: Spectre
Post by: broba_fett on January 17, 2019, 06:41:17 PM
Snagged this bad boy with premium sound with a 75$ mystery box! Love this thing!


Title: Re: New Saber: Spectre
Post by: Edon Bluewolf on January 17, 2019, 08:07:05 PM
Wow that is super lucky!