Saber Forum

General Chat => Technical => Topic started by: rickling on September 03, 2018, 02:36:34 PM



Title: Light Saber pre-purchasing questions.
Post by: rickling on September 03, 2018, 02:36:34 PM
Hello was using site so will try here and see if is better!
Hello was using site so will if here is better !
Was wondering about the recharge port is just a micro usb port is it?
The covertec wheel and clip is one on saber and the clip for belt cause no good ordering clip if no wheel on hilt is there or is standard?
Also differences between chosen one SE and graflex is it? SE and CE?
Buying overseas to Australia assume no prob if using fedex with customs, import charges etc?

Thanks
Rick Ling


Sent from my iPhone using Tapatalk


Title: Re: Light Saber pre-purchasing questions.
Post by: Infinit01 on September 03, 2018, 03:13:14 PM
Hello and welcome to the forum. Here’s the answers in the order that you asked.

It’s mini USB and NOT micro usb. See the picture below
(http://image.ibb.co/ds0B5K/B6_BF59_BB_8_DBD_4258_8909_BA1_C3_E030_D11.jpg)

The converted wheel is attached to the saber and the clip goes into your belt, the wheel slips into the clip. Here’s the link to the clip

http://ultrasabers.com/product/covertec-clip/ (http://ultrasabers.com/product/covertec-clip/)

The Chosen one is Darth Vader’s lightsaber from the original trilogy and the Graflex is Anakin Skywalker’s lightsaber from Episode 3 that gets passed down to Luke.
See this link for a side by side comparison:

http://www.saberforum.com/index.php?topic=36577.0 (http://www.saberforum.com/index.php?topic=36577.0)

The only difference between the CE and the SE is that CE is nickel plated with the SE isn’t.


I’m not sure about shipping but most of our out of country members receive theirs with a week or two. One of them will chime in about that soon.

Hope this helps.


Title: Re: Light Saber pre-purchasing questions.
Post by: Racona Nova on September 03, 2018, 05:43:45 PM
Nope, the Recharge Port is NEITHER Micro-USB NOR Mini-USB. It's a power jack that needs a fitting power plug. Google is your friend if you want to check how they look like. Ultrasabers uses a power jack that needs a 2.5mm power plug.

The only USB ports you will find on Ultrasabers are either for the Obsidian v3 & v4 sound boards, the Emerald Driver and the Diamond Controller.

Everything else that Infinit01 said is correct.


Title: Re: Light Saber pre-purchasing questions.
Post by: Infinit01 on September 03, 2018, 07:22:36 PM
My bad, I was thinking about the Obsidian sound card.... Yes, the recharge port is the 2.5 mm plug. 


Title: Re: Light Saber pre-purchasing questions.
Post by: rickling on September 04, 2018, 07:05:37 AM
Hello and welcome to the forum. Here’s the answers in the order that you asked.

It’s mini USB and NOT micro usb. See the picture below
([url]http://image.ibb.co/ds0B5K/B6_BF59_BB_8_DBD_4258_8909_BA1_C3_E030_D11.jpg[/url])

The converted wheel is attached to the saber and the clip goes into your belt, the wheel slips into the clip. Here’s the link to the clip

[url]http://ultrasabers.com/product/covertec-clip/[/url] ([url]http://ultrasabers.com/product/covertec-clip/[/url])

The Chosen one is Darth Vader’s lightsaber from the original trilogy and the Graflex is Anakin Skywalker’s lightsaber from Episode 3 that gets passed down to Luke.
See this link for a side by side comparison:

[url]http://www.saberforum.com/index.php?topic=36577.0[/url] ([url]http://www.saberforum.com/index.php?topic=36577.0[/url])

The only difference between the CE and the SE is that CE is nickel plated with the SE isn’t.


I’m not sure about shipping but most of our out of country members receive theirs with a week or two. One of them will chime in about that soon.

Hope this helps.

Thanks yes got a clip and wheel on my older saber was asking if new sabers come with wheel already if so then just need another clip!
On usb charging port no prob got both cables. On saber differences with graflex and chosen one will review.
Thanks helped greatly.


Sent from my iPhone using Tapatalk


Title: Re: Re: Light Saber pre-purchasing questions.
Post by: tx_tuff on September 04, 2018, 10:46:42 AM
He was wrong about the recharge port, it is not USB at all. It is a 2.5mm charger. Will look something like this. (https://uploads.tapatalk-cdn.com/20180904/4d8717904c3aa380f30a101ebc6a429d.jpg)

Sent from my XT1650 using Tapatalk



Title: Re: Light Saber pre-purchasing questions.
Post by: Infinit01 on September 14, 2018, 12:52:40 PM
It’s a actually a 2.1mm charger