|
Title: Just seeing if I can connect these attachments to a specific hilt. Post by: Three_Scarabs on June 27, 2019, 11:40:37 PM I'm looking at getting a Dark Initiate v2 saber, but wanted some attachments. Can it work with the Dark War Glaive Emitter with Claws and Scorpion Pommel? If so is it easy to switch them out?
Title: Re: Just seeing if I can connect these attachments to a specific hilt. Post by: tx_tuff on June 28, 2019, 08:13:20 AM No. When looking at a saber on the website look at the description. In order for you to use other emitters and pommels it has to be MHS compatible. So sabers have just an MHS pommel, some have both MHS emitter and pommel. And some have neither like the one you asked about.
Sent from my LM-V405 using Tapatalk Title: Re: Just seeing if I can connect these attachments to a specific hilt. Post by: Infinit01 on June 28, 2019, 04:39:44 AM What Tx said, V2s will only work with themselves while V3s to V5s are MHS compatible which are swappable between each other and other MHS hilts like the rest of the lineup. So pretty much anything not V2 should be swappable with any V3 to V5 saber
Title: Re: Just seeing if I can connect these attachments to a specific hilt. Post by: Three_Scarabs on June 28, 2019, 02:11:48 PM Thank you so much.
Title: Re: Just seeing if I can connect these attachments to a specific hilt. Post by: firehand10k on July 16, 2019, 01:52:01 AM What Tx said, V2s will only work with themselves while V3s to V5s are MHS compatible which are swappable between each other and other MHS hilts like the rest of the lineup. So pretty much anything not V2 should be swappable with any V3 to V5 saber NOTE: Only the pommels are swappable on the V3-V5 series sabers. The body and emitter for those is one piece and the emitters cannot be switched at all. Title: Re: Just seeing if I can connect these attachments to a specific hilt. Post by: Karmack on July 16, 2019, 05:47:48 PM NOTE: Only the pommels are swappable on the V3-V5 series sabers. The body and emitter for those is one piece and the emitters cannot be switched at all. Ditto. If you want to add claws, you'd have to do some modification to a V3 -V5 hilt, probably consisting of drilling some holes and tapping them for the screws... You wouldn't be able to order a War Glaive emitter, for instance, and add it to an Aeon, because the Aeon emitter is fixed. :-/ |