Orthoman
Force Sensitive
Force Alignment: 0
Posts: 4
|
|
« on: May 10, 2019, 03:19:35 AM » |
|
I got an Electrum Wind a few years ago with both Obsidian and Emerald. .Always worked fine. One day, it started cutting off randomly, and seemed like a loose wire. I opened it up and looked at the wiring harness, and found several bad connections. I just recently got around to fixing it. There were three wires that were not connected, and I noticed when I put them together, the blade worked good. I checked wiring diagrams and everything seemed to match up. So, I redid these connections. Used heat shrink tubing and everything. The saber works fine for the most part - all of the sounds work, FOC works, the selected blade color works. All of the default sounds work. I have both Emerald and Obsidian boards. I can also connect to both boards with the 2.45 version of the Launcher. I can also change all of the colors of the blade successfully on the Emerald board. I can connect to the Obsidian board. I had 8 banks or so of default sounds, just like it came from factrory, and saw no reason to change those.
The problem - I can cycle through the menu just fine, but I cannot select any of the other sound banks. I can hear the voice announce the different sound banks, Obsidian, Ancient, Sith, Episiodes 2-6, etc - but when I hold down the button to select, I do not hear the "confirmed" voice, and when I let go of the button, the lights come back on, but there is No SOUND at all. The only thing I can do is shut off the saber and start over, and then I am back at the default Obsidian sounds. The saber button works perfectly in every other way. The saber itself works fine in every other way. I simply cannot select any of the other sounds from the Obsidian menu.
Any ideas? Thanks Charles W.
C. Whittenburg
|