Formerly there was a manual for the US2.5 at FX-Sabers (written by Jango), but somehow that info page has gone missing
![Sad](http://saberforum.com/Smileys/default/sad.gif)
...
Update:
For all others in need, here's some info I found at TCSS; I'm still lacking the recommended input voltage for the different LED types (especially for Seoul P4 Green), so if someone could chime in I would be grateful
![Wink](http://saberforum.com/Smileys/default/wink.gif)
Output (depending on selected LED type):
1. Luxeon 3 all colors white/blue/green (1000mah)
2. Luxeon 3 red/amber/red-orange (1400mah)
3. Luxeon 5 (850mah)
4. Luxeon K2 (1500mah)
5. Luxeon 3 Overdrive (1200mah)
(
http://forums.ultrasabers.com/showthread.php?6649-UltraSound-2.0-Info)
Battery input voltage:
Maximum for board = 9.6V
Minimum for Luxeon 3 and K2 = 4.5V
Minimum for Luxeon 5 = 7.2V
IMPORTANT! (be sure to use the correct voltage/power with corresponding LED type)
What this means is DO NOT try and run your lux3 off of 9v or even 7.2v
For the 2.95-4v LED's (lux3, P4, K2, etc..) you should be running 6v MAX
(
http://forums.ultrasabers.com/showthread.php?9056-UltraSound-2.5-addendum)
Ultrasound 2.5 wiring diagram:
http://forums.ultrasabers.com/showthread.php?12373-New-Wiring-Diagram-with-USv-2.5rUltrasound 2.5 wiring video:
http://forums.ultrasabers.com/showthread.php?9994-Ultrasound-2.5-wiring-videoRegards,
Greywolf