Click here for lightsabers
  • Home
  • Help
  • Login
  • Register
Pages: [1]   Go Down
Author Topic: Flash on clash.  (Read 1329 times)
a66jagdream
Force Sensitive
*

Force Alignment: 0
Posts: 1


« on: March 09, 2016, 02:14:51 AM »

I just bought a new saber with emerald driver. And I'm having trouble getting the flash to clash to work. I know I did everything right on the driver itself.
Logged

Landen Se-Sentien
Shadow Sentinel of the Manticore Order
Knight Commander
*

Force Alignment: 1828
Posts: 3781


I work in the Darkness in service of the Light


« Reply #1 on: March 09, 2016, 02:46:56 AM »

First, pleas post in the rules section. It's on the main page in the big red letters.

Did you also get sound? I dont think you can have FoC without sound. Have you tried adjusting the obsidian sensitivity down? Also, there is a box to check in order to enable the FoC in both the emerald and obsidian tabs of the launcher. Are they both checked?

I don't really know where to start, because I don't know the issue, so I'm going with the very basics.
Logged

Signature banner by DarthScrub

PapaBliss
Knight Sergeant
*

Force Alignment: 14
Posts: 86


I am a guardian of balance


« Reply #2 on: March 10, 2016, 02:30:10 AM »

If you do have sound check that the enable flash on clash light effects box is checked. You need to connect to the usb on the sound board to access those settings.

If you are still having issues post details of your problem.

and don't forget to acknowledge the rules as Landen Se-Sentien asked  Smiley
Logged

Saber owned:
Graflex SE w/ Emerald RGBW and Obsidian v4 - DUKE Blue / Silver
Manticore w/ Emerald RGBW and Obsidian v4 - DVA / Silver
Apprentice w/ Obsidian v4 - CG / Silver

Bulvoy
Knight Commander
*

Force Alignment: 500
Posts: 547


~Sipra Gehaz~ Rebel Legion "Ghost Base"


« Reply #3 on: March 10, 2016, 02:44:12 AM »

as stated  hard to give a full answer without some further details however when you have your saber plugged in and your program is up make sure just in case make sure FOC is enabled. then "SAVE"  for this picture i re-adjusted the settings to factory settings for  an example
Logged

UltraSaber's by bulvoy, on Flickr
Menace - Emerald V4s- RavenSS pommel
Manticore V4s-CG- S /FOC-Renegade small pommel
Crimson Scorpion- V4s-BR- O/FOC
Dominix V3s-SRD
Initiate V4 Lite- VA
            "Im here to chew bubblegum & kick ass, and I'm all outta bubblegum"...

Pages: [1]   Go Up
Send this topic | Print
Jump to: