Click here for lightsabers
  • Home
  • Help
  • Login
  • Register
Pages: [1]   Go Down
Author Topic: Scorpion blade plug 4" long  (Read 938 times)
Triniirish
Knight Apprentice
*

Force Alignment: 47
Posts: 28



« on: January 03, 2017, 11:34:05 PM »


My attempt at a blade plug for the Scorpion.


Here it is next to the US X blade plug for reference.


This photo is showing the X blade plug in the Scorpion... I find it to be a bit short.


My 4" plug in the Scorpion.


And again with the X plug for reference.

The material is White Translucent Nylon 101 Round Tubing, 1" OD, 3/4" ID, 12" Length obtained from Amazon.



Logged

There is no emotion, there is peace.
There is no ignorance, there is knowledge.
There is no passion, there is serenity.
There is no chaos, there is harmony.
There is no death, there is the Force.


Jediseth
Knight Commander
*

Force Alignment: 828
Posts: 1551


"If I told you, you wouldn't like it." Han Solo


« Reply #1 on: January 03, 2017, 11:57:32 PM »

Hey any chance you can show me a picture with the emitter off? Some of us are talking today and wondering  what parts come off and are MHS compatible. Like is there a removable neck piece?
Logged

Guardian : GB, FOC Red, V4, 11-15                        Reaper: V4, BR, 4-17
Chosen One CE : Emerald, V4, 12-15
Consular: Emerald V4, 1-16
Manticore: BR, FOC Orange, QD, V4, 11-16
Monarch: Emerald, V4, 2016 Autumn Raffle -1st
Arbiter: V4, SD, Silver FOC, QD, 3-17
Archon V2.1, Diamond, 4-17

Triniirish
Knight Apprentice
*

Force Alignment: 47
Posts: 28



« Reply #2 on: January 04, 2017, 12:08:48 AM »

Hey any chance you can show me a picture with the emitter off? Some of us are talking today and wondering  what parts come off and are MHS compatible. Like is there a removable neck piece?


I have looked at taking it off but have not attempted it. The screws for the claw have to  be accessed via the windows in the emitter. The screws are quite tight and I don't want to force it, (I also noticed a red liquid between the claw and emitter, not too sure what it is!) When you look through the windows closest to the AV switch you can see the threads to unscrew the emitter and the top screw for the claw is in a cut out area which stops the emitter from turning unless it is removed.

See also this thread:

http://www.saberforum.com/index.php?topic=1186.0
Logged

There is no emotion, there is peace.
There is no ignorance, there is knowledge.
There is no passion, there is serenity.
There is no chaos, there is harmony.
There is no death, there is the Force.


Jediseth
Knight Commander
*

Force Alignment: 828
Posts: 1551


"If I told you, you wouldn't like it." Han Solo


« Reply #3 on: January 04, 2017, 12:50:56 AM »

Does sound a little complicated. Thanks, I was hoping it just screwed off.
Logged

Guardian : GB, FOC Red, V4, 11-15                        Reaper: V4, BR, 4-17
Chosen One CE : Emerald, V4, 12-15
Consular: Emerald V4, 1-16
Manticore: BR, FOC Orange, QD, V4, 11-16
Monarch: Emerald, V4, 2016 Autumn Raffle -1st
Arbiter: V4, SD, Silver FOC, QD, 3-17
Archon V2.1, Diamond, 4-17

firehand10k
Knight Commander
*

Force Alignment: 388
Posts: 1324



WWW
« Reply #4 on: January 05, 2017, 04:41:49 AM »

Nice Plug! I like the full length ones better.

Only the emitter piece and the pommel 2 pieces are MHS compatible. There are no separations under the shroud.
Because of the shroud the pommel is wider than others. And with the claw the emitter is hard to get off and if kept can be in the way of most other emitters.

Reaper with Scorpion Pommel by Firehand10k, on Flickr
Reaper Scorpion Cross by Firehand10k, on Flickr
Logged

Have:
Azure Reaper
Crimson Scorpion
Aeon LE  V4 pair
Monarch
Azure Omen
Mantis
Manticore CE
Guardian
Chosen One
Graflex
Menace staff
Sentinel V4 staff
Zweihander
Shark
Bane
Brood Guard

Pages: [1]   Go Up
Send this topic | Print
Jump to: