Click here for lightsabers
  • Home
  • Help
  • Login
  • Register
Pages: [1]   Go Down
Author Topic: Lockup color change without Flash on Clash?  (Read 849 times)
HelloThere
Force Sensitive
*

Force Alignment: 3
Posts: 4


A fine addition to my collection...


« on: February 07, 2018, 09:56:15 PM »

Is it possible to set a different color for lockup without changing the color for flash on clash? For example, if I wanted to have the blade flash between red and orange during lockup, but stay red with no color change when there is a clash. If there is already a forum post on this, please direct me towards it as I could not find it.
Logged

My Saber
Initiate LE V4 w/ Obsidian v4 sound and Emerald Driver with RGBW setup.

Therion Jinn
Knight Commander
*

Force Alignment: -1426
Posts: 4429


May The Force Serve You Well


« Reply #1 on: February 08, 2018, 04:23:23 AM »

With the Diamond board, it might be. I can't say as I don't have one to test with.
Looks like the FOC and lockup are the same color otherwise
Logged


VaporTrail_000
Knight Sergeant
*

Force Alignment: 39
Posts: 82


« Reply #2 on: February 08, 2018, 07:53:09 AM »

With a Diamond board, I can confirm it is possible.  The lockup can act as a fully programmable 'second idle' that overrides any swings, spins, clashes, etc. So basically if you use the lockup as a second idle, you can't trigger anything else until you turn it off and let the board go back to the primary idle.

For the older boards, I don't think the boards are configured for that kind of operation. FoC is pretty much hardwired from what I can tell.
Logged

Dark Apprentice LE V4 In Guardian Blue (Winter Sale Free Initiate)
Initiate V4 in Consular Green (Winter Sale Free Mystery Box)
Dark Initiate V4 LE in Consular Green, w/ LI-Ion pack (Winter Raffle 3rd Prize)
1 Diamond Initiate V4 LE
1 Diamond Dark Initiate V4

HelloThere
Force Sensitive
*

Force Alignment: 3
Posts: 4


A fine addition to my collection...


« Reply #3 on: February 13, 2018, 08:00:19 AM »

I figured it out! I have an Emerald LED driver with an Obsidian V4 soundboard. From the main menu of the Obsidian V4 soundboard when it is plugged into the computer, you can uncheck "Enable Flash on Clash light effects" or "Enable Lockup light effects". Make sure to write to board to save your changes and done! Cheesy You have to be plugged in directly to the soundboard to do this and you can not have different colors for each. However, if you prefer FoC off while keeping the lockup effect, or the opposite/both off, it can be done!
Logged

My Saber
Initiate LE V4 w/ Obsidian v4 sound and Emerald Driver with RGBW setup.

DaddyFlip
Knight Ensign
*

Force Alignment: 37
Posts: 150


^DarthScrub Avatar Mod!


« Reply #4 on: February 13, 2018, 01:23:47 PM »

"Could you launch an ICBM horizontally?"

"Sure. Why would you want to?"
Logged

Pages: [1]   Go Up
Send this topic | Print
Jump to: