Click here for lightsabers
  • Home
  • Help
  • Login
  • Register
Pages: [1]   Go Down
Author Topic: Light Saber pre-purchasing questions.  (Read 263 times)
rickling
Force Sensitive
*

Force Alignment: 0
Posts: 4


« on: September 03, 2018, 07:36:34 AM »

Hello was using site so will try here and see if is better!
Hello was using site so will if here is better !
Was wondering about the recharge port is just a micro usb port is it?
The covertec wheel and clip is one on saber and the clip for belt cause no good ordering clip if no wheel on hilt is there or is standard?
Also differences between chosen one SE and graflex is it? SE and CE?
Buying overseas to Australia assume no prob if using fedex with customs, import charges etc?

Thanks
Rick Ling


Sent from my iPhone using Tapatalk
Logged

Infinit01
Knight Commander
*

Force Alignment: 1008
Posts: 5245


2nd Knight of the Aeonix Order


« Reply #1 on: September 03, 2018, 08:13:14 AM »

Hello and welcome to the forum. Hereís the answers in the order that you asked.

Itís mini USB and NOT micro usb. See the picture below


The converted wheel is attached to the saber and the clip goes into your belt, the wheel slips into the clip. Hereís the link to the clip

http://ultrasabers.com/product/covertec-clip/

The Chosen one is Darth Vaderís lightsaber from the original trilogy and the Graflex is Anakin Skywalkerís lightsaber from Episode 3 that gets passed down to Luke.
See this link for a side by side comparison:

http://www.saberforum.com/index.php?topic=36577.0

The only difference between the CE and the SE is that CE is nickel plated with the SE isnít.


Iím not sure about shipping but most of our out of country members receive theirs with a week or two. One of them will chime in about that soon.

Hope this helps.
Logged



Racona Nova
Knight of the Obsidian Order
Knight Commander
*

Force Alignment: 983
Posts: 4045


There is no good or evil....there's only power!


« Reply #2 on: September 03, 2018, 10:43:45 AM »

Nope, the Recharge Port is NEITHER Micro-USB NOR Mini-USB. It's a power jack that needs a fitting power plug. Google is your friend if you want to check how they look like. Ultrasabers uses a power jack that needs a 2.5mm power plug.

The only USB ports you will find on Ultrasabers are either for the Obsidian v3 & v4 sound boards, the Emerald Driver and the Diamond Controller.

Everything else that Infinit01 said is correct.
Logged


Sig by Master Nero

Phantasm v3 LE (Obs v3) - AB w/ FoC AS---Manticore (Obs v3) - BR w/ FoC AS (QD)---Archon v2.1 (Obs v3) - RGBW Emerald

Infinit01
Knight Commander
*

Force Alignment: 1008
Posts: 5245


2nd Knight of the Aeonix Order


« Reply #3 on: September 03, 2018, 12:22:36 PM »

My bad, I was thinking about the Obsidian sound card.... Yes, the recharge port is the 2.5 mm plug. 
Logged



rickling
Force Sensitive
*

Force Alignment: 0
Posts: 4


« Reply #4 on: September 04, 2018, 12:05:37 AM »

Hello and welcome to the forum. Hereís the answers in the order that you asked.

Itís mini USB and NOT micro usb. See the picture below


The converted wheel is attached to the saber and the clip goes into your belt, the wheel slips into the clip. Hereís the link to the clip

http://ultrasabers.com/product/covertec-clip/

The Chosen one is Darth Vaderís lightsaber from the original trilogy and the Graflex is Anakin Skywalkerís lightsaber from Episode 3 that gets passed down to Luke.
See this link for a side by side comparison:

http://www.saberforum.com/index.php?topic=36577.0

The only difference between the CE and the SE is that CE is nickel plated with the SE isnít.


Iím not sure about shipping but most of our out of country members receive theirs with a week or two. One of them will chime in about that soon.

Hope this helps.

Thanks yes got a clip and wheel on my older saber was asking if new sabers come with wheel already if so then just need another clip!
On usb charging port no prob got both cables. On saber differences with graflex and chosen one will review.
Thanks helped greatly.


Sent from my iPhone using Tapatalk
Logged

tx_tuff
Knight Commander
*

Force Alignment: -846
Posts: 3077



« Reply #5 on: September 04, 2018, 03:46:42 AM »

He was wrong about the recharge port, it is not USB at all. It is a 2.5mm charger. Will look something like this.

Sent from my XT1650 using Tapatalk

Logged

Infinit01
Knight Commander
*

Force Alignment: 1008
Posts: 5245


2nd Knight of the Aeonix Order


« Reply #6 on: September 14, 2018, 05:52:40 AM »

Itís a actually a 2.1mm charger
Logged



Pages: [1]   Go Up
Send this topic | Print
Jump to: