This is my simple review of the newest UltraSabers dualsaber, The Dominicide LE. No video, only photos.
Firstly, it's a heavier, (about 3 lbs.) longer dualsaber (about 20 inches with my mods) than a normal one, say for example, an Initiate V4 dualsaber. Also, a bit thicker (about 1.5 inches). It's not made to split in half like other dualsabers, it's made to be one unit. Mine, I removed the clawed emitters in preference for 2 Shock LE emitters. The colors are VERY close, but the Shocks are a bit brassy colored. I went with the diamond soundcard, with a Black AV switch with white illumination. The diamond sound is just like one from any other diamond saber, all one unit with battery and speaker, grafted into the center chamber of the saber. There is a hinged door to access this chamber though, as shown below:
As shown in that picture, the wires for the 2nd emitter are underneath the diamond controller and to me, should have more protection. I foresee that they could bind or pinch while being spun or during combat. Maybe some heatshrink, or maybe a channel be crafted into the lower portion. It needs thinking about.
In this next picture, it shows 2 triangle/arrow indicators to show which set screws need to be removed to access the soundcard/batteries.
Finally, after owning it for 4 days, I say it's comfortable to use, but a bit heavy for one handed use (of course). I have taken it down so it's in 6 pieces - 2 emitters, 2 necks, center chamber and door. I'm not going to show a pic of that, it's not needed. I do like it and plan to have it handy for Halloween and the like. I'll also be thinking of what improvements it could use.
With my Dominicide LE, I also received a Initiate V2 with GB led and a Dark Initiate V4 with blazing red LED. Always fun for everyone to play with.
P.S. I forgot to mention, the original emitters were about 1 inch deep, with the shock emitters making the top of the LED module to the end of the shock emitter about 2.75 inches. The emitters screw into place and each have a set screw to hold them in tight.