Warglaive claw screw thread?

[Fatalis]

Does anyone know what the thread is for the small screw that hold the claws on for the warglaive?


Thanks

[firehand10k]

8-32 like the blade screws.

[Fatalis]

8-32 like the blade screws.

I tried screwing in he blade retention screw into it and it’s to big.  Maybe 6-32?

[firehand10k]

Theres a screw hold that's 8-32 then there are 2 unthreaded holes, they put small spring pins in to hold the claw on and in line, per claw. Are you trying to put a screw into the pin holes?

[Fatalis]

Theres a screw hold that's 8-32 then there are 2 unthreaded holes, they put small spring pins in to hold the claw on and in line, per claw. Are you trying to put a screw into the pin holes?

No Sir. I even took it to the hardware store to make sure.  The 4 threaded holes below the 8 spring holes are 6-32 thread and the blade screw hole thread is 8-32.

[firehand10k]

I must have tapped mine out sometime I don't remember. I don't use claws on my Zweihander so it has setscrews in all holes and they're  the ones I took out of the old Flamberge blade holder I replaced with the Warglaive one.

[Fatalis]

I must have tapped mine out sometime I don't remember. I don't use claws on my Zweihander so it has setscrews in all holes and they're the ones I took out of the old Flamberge blade holder I replaced with the Warglaive one.

Oh, please post a pic of the Zweihander! I really want some claws on mine, but US hasn't responded back with my request.

[firehand10k]

I know I drilled out the pin holes to show light through but I still don't remember enlarging the screw holes.

Here is the Zweihander with a couple of other Ultrasabers. It is my main heavy dueling crossguard.

[Fatalis]

I know I drilled out the pin holes to show light through but I still don't remember enlarging the screw holes.

Here is the Zweihander with a couple of other Ultrasabers. It is my main heavy dueling crossguard.

What a monster, I like! WHere did you get the small extension at the pommel?