Click here for lightsabers
  • Home
  • Help
  • Login
  • Register
Pages: [1]   Go Down
Author Topic: Screws  (Read 1620 times)
Kit-Rohm
Force Sensitive
*

Force Alignment: 0
Posts: 3
« on: February 03, 2011, 02:31:16 AM »
Hey this may sound really stupid but I just got a DIY hilt th prophecy and I also got a blade. So how do I attach the blade? is it the two screws up by the emitter? or something that should go into the small holes just under the emitter? I am a really newb at this so thanks for the help.
Logged

Kit-Rohm
Force Sensitive
*

Force Alignment: 0
Posts: 3
« Reply #1 on: February 03, 2011, 02:53:36 AM »
Ok I am pretty sure the screws that hold the blade in place are the ones on the emitter with the knobs but even when I tighten them the blade is pretty wobbly for a saber I would use in filming I mean. It just seems as if the stability is off a bit.
Logged

Onli-Won Kanomi
Knight Officer
*

Force Alignment: 5
Posts: 123


Jedi Knight Of Faith
« Reply #2 on: February 03, 2011, 02:54:36 AM »
The two threaded holes furthest forward are the blade retention screw holes...the two holes in the narrower neck section just behind the emitter are just 'windows' to let the LED blade colour light shine through. Hope that helps.
Logged
plain Stunt [Guardian Blue]
gold Minilord [Adegan Silver]
purple Minilord [Fire Orange]
Initiate v1 DIY [Fire Orange]
Wraith v1 [Fire Orange]
Wraith LE [Sunrider's Destiny]
Dark Apprentice [Blazing Red]
The Overlord [SRD]
Liberator v2 [Violet Amethyst]
Shock LE DIY [under construction]

ThreadJack
Lady of the Order Aeon
SaberForum.Com Moderator
Knight Commander
OVER 9000!!
*****

Force Alignment: 809
Posts: 13786

Truly, she will be strong- A luminous being is she
« Reply #3 on: February 03, 2011, 03:37:38 AM »
No offense, but if you don't even know how to attach the blade, installing electronics might not be the best idea.
Logged
(Sig by me!)
Now accepting dark side points.

Ultra
Lord Commander
Administrator
Knight Commander
******

Force Alignment: 1765
Posts: 2194


IN HOC SIGNO VINCES


WWW
« Reply #4 on: February 03, 2011, 03:43:54 AM »
You're doing it wrong.  Take the retention bolt retainers (what you called knobs) off the retention bolts.  Then use an allen wrench and tighten the bolts so the blade is snug.  Then screw the retainers back onto the retention bolts.
Logged
-Ultra
http://www.ultrasabers.com

Kit-Rohm
Force Sensitive
*

Force Alignment: 0
Posts: 3
« Reply #5 on: February 03, 2011, 05:51:14 AM »
Thanks Ultra. That is what I did and it worked.
Ps. I am pretty good with electronics its late here and I am having a bit of a blond day:P
Logged

Pages: [1]   Go Up
Send this topic | Print
Jump to: