|
Title: Cleaning the blade Post by: Paragon468 on February 18, 2014, 02:10:05 PM Not sure if this is the proper place to ask this, so mods feel free to move it.
Does anybody have tips for cleaning the inside of the blade? I had left my blade out of my saber uncovered for a couple days and there are a couple small spots on the inside now. Nothing major or noticeable, but it'd be nice to clean it out. Thanks. Title: Re: Cleaning the blade Post by: Master Bluespike74 on February 18, 2014, 04:14:28 PM Two methods I use:
1. Vacuum cleaner with a lint trap attachment (fine tipped hose to get inside heavy grade blades and mid grade blades is best.) 2. Canned air sprayed for 30 seconds. Be careful not to let any of the liquid squirt into it. Use crutch tips to keep your blades covered in the future. Title: Re: Cleaning the blade Post by: Racona Nova on February 18, 2014, 04:43:14 PM Or get the round caps (http://www.ultrasabers.com/product-p/parts%20-%20round%20cap.htm) US sells on their website. The small ones fit the blades.
|