|
Title: Ordering a saber and a quick disconnect.. Post by: LoganV on August 23, 2011, 05:11:22 AM Hey everyone. I have a few questions..
I want to order a Dark Prophecy LE and a spare MLS unit with quick disconnect- one of the ones that are appropriately sized.(Not the one for the Bellicose, Bane, ect..) If I get the quick disconnect, will the module coming in the saber be the same kind of module I get on the side? And if it is, will the quick disconnect also be found within the saber? (To make the colors interchangeable.) Hope this makes sense. Thanks everyone. Title: Re: Ordering a saber and a quick disconnect.. Post by: ThreadJack on August 23, 2011, 05:50:25 AM Are you talking about this?:http://www.ultrasabers.com/product-p/led%20module.htm
Cause if you are, that's NOT a quick disconnect. It's an entirely new LED, that you solder in to replace the one already in your saber. Title: Re: Ordering a saber and a quick disconnect.. Post by: LoganV on August 23, 2011, 07:17:39 AM This is what I am referring to. But if I order it with the quick disconnect option, will the module come able to be changed with the led in the saber?
Title: Re: Ordering a saber and a quick disconnect.. Post by: Nyte on August 23, 2011, 07:33:51 AM If you order the LED module with Quick Disconnect, it will come with the Quick Disconnect connector. However, since the Dark Prophecy LE doesn't have the Quick Disconnect option, you won't be able to swap LEDs. Unless you solder in the other end of the connector into the saber electronics yourself, that is.
Anyhow, you should e-mail them at [email protected] and ask whether they could add quick disconnect to your saber or not. If not, you could wait for Ultra's CSO and have him add it as a custom job. Title: Re: Ordering a saber and a quick disconnect.. Post by: DirtyJersey on August 23, 2011, 08:04:15 AM If you order the LED module with Quick Disconnect, it will come with the Quick Disconnect connector. However, since the Dark Prophecy LE doesn't have the Quick Disconnect option, you won't be able to swap LEDs. Unless you solder in the other end of the connector into the saber electronics yourself, that is. That's a good point, but then the LED module he takes out wouldn't be compatible with the quick disconnect that he just installed. Unless of course he solders a quick disconnect to the original LED module also. Title: Re: Ordering a saber and a quick disconnect.. Post by: Nyte on August 23, 2011, 08:32:52 AM That's a good point, but then the LED module he takes out wouldn't be compatible with the quick disconnect that he just installed. Unless of course he solders a quick disconnect to the original LED module also. Ah, you're right. I didn't consider that! He'd have to buy an extra connector to solder on to that LED module, since he'd have already used the one that came with the separate module. |