|
Title: Emitter on Lost Gray won't stay in Post by: Owlfly on July 14, 2018, 04:34:06 PM I just bought a lost gray and so far I love it. But I am having some problems with the emitter/light piece coming out. It did not when I first got it, but it has recently become unstable and slides out whenever it is upside down. Is there a way to fix this?
Thanks! Title: Re: Emitter on Lost Gray won't stay in Post by: Obese Wan Kenobese on July 14, 2018, 10:49:06 AM Best to contact ultrasabers info to be sure. It may be that you just need to screw the emitter back in, or that you need to tighten a retention screw some place.
Title: Re: Emitter on Lost Gray won't stay in Post by: tx_tuff on July 15, 2018, 07:23:03 AM Are you talking about the emitter or LED? I'm confused by your wording. If you are talking about the LED you need a blade in the saber or a blues plug to keep it securely in the hilt.
Title: Re: Emitter on Lost Gray won't stay in Post by: Owlfly on July 16, 2018, 01:35:07 AM Sorry about the wording, you are right. It is a bit vague.
The LED is the piece that is not staying in.. Title: Re: Emitter on Lost Gray won't stay in Post by: Infinit01 on July 17, 2018, 06:03:21 PM Sorry about the wording, you are right. It is a bit vague. The LED is the piece that is not staying in.. I would contact US support for more info or help. May be something pretty easy, take pictures and send it to them along with your request. Title: Re: Emitter on Lost Gray won't stay in Post by: tx_tuff on July 17, 2018, 01:13:13 PM I would contact US support for more info or help. May be something pretty easy, take pictures and send it to them along with your request. He is saying the LED comes out when the hilt is upside down without a blade. That isn't an issue since US uses the blade or blade plug to hold the LED in the hilt. Title: Re: Emitter on Lost Gray won't stay in Post by: chalion on July 18, 2018, 05:43:13 PM I'm looking at my Lost Gray and the LED Module looks to be press fit inside. There's no retention screw that I can see in the hilt for the module, only the blade retention screw. My module is snug and does not move at all, no matter if it's upside-down or even tapped on a table.
(https://i.imgur.com/cR9bChS.jpg) Title: Re: Emitter on Lost Gray won't stay in Post by: Zren Tobas on July 19, 2018, 04:42:19 AM If the led is still sitting in place try pressing the blade somewhat harder on the module, the leds are usually press fitted with the blades on top. Oh and ^^^I never saw your Dorinian review I don't think, noticing one in your signature pic :P
Title: Re: Emitter on Lost Gray won't stay in Post by: James Casey on July 19, 2018, 12:35:00 PM If you have the blade out and the hilt's hanging on your belt, I recommend either using a blade plug, or tightening the retention screw so that the LED can't slide out of the hilt.
Title: Re: Emitter on Lost Gray won't stay in Post by: chalion on July 19, 2018, 10:04:44 PM If the led is still sitting in place try pressing the blade somewhat harder on the module, the leds are usually press fitted with the blades on top. Oh and ^^^I never saw your Dorinian review I don't think, noticing one in your signature pic :P Video review; forget it. I don't do video. Saber review, with picture comparisons? Maybe, if I think my opinion is needed. |