|
Title: Grab bag Sentinel LE question Post by: Duck on July 21, 2019, 02:05:42 AM At the Denver Pop Con, I jumped in and bought 2 grab bags. I got a Sentinel LE with just light and a Dark Sentinel LE with a full sound board and lights. My question, can I purchase a second Sentinel LE with sound and a coupler to make a double bladed sane or should I buy a sound board in addition to ensure both sabers operate the same when mated?
Title: Re: Grab bag Sentinel LE question Post by: Therion Jinn on July 21, 2019, 02:20:53 AM It can work either way, to be honest.
You're right that the sound will react differently if only in one half of the staff, though Title: Re: Grab bag Sentinel LE question Post by: Duck on July 25, 2019, 06:03:19 PM Well, my order is in. Any guidance on adding the obsidian board and where to get a speaker?
Title: Re: Grab bag Sentinel LE question Post by: Illyiss on July 25, 2019, 06:11:11 PM The Custom Saber Shop. ALso, you will need a lithium ion battery (unless you got a lite soundboard), a buckpuck or resistor, and a momentary switch.
Title: Re: Grab bag Sentinel LE question Post by: Duck on July 25, 2019, 06:31:39 PM I found the speaker/ battery set in the shop,
https://ultrasabers.com/product/2x-14500-li-ion-battery-holder-speaker-combo/# . Is there a video guide on tearing down and rebuilding these sabers? Also, a good source for the momentary switch? Title: Re: Grab bag Sentinel LE question Post by: Racona Nova on July 26, 2019, 05:10:41 PM Momentary switches are sold by US as well.
Title: Re: Grab bag Sentinel LE question Post by: Duck on August 05, 2019, 11:52:49 PM I got all the parts in and have started the build. Question, do I remove the capacitor that is between the battery and the LED?
https://imgur.com/a/q6M2uHb Title: Re: Grab bag Sentinel LE question Post by: Racona Nova on August 06, 2019, 01:44:55 PM If you have ordered a BuckPuck for the build, yes, you need to remove the resistor. If the LED itself needs resistors as well (most likely for mixed colours and Blazing Red), they should sit in a different place. I'm not sure, though, so maybe an experienced saber builder could help us? ;)
Title: Re: Grab bag Sentinel LE question Post by: Duck on August 07, 2019, 01:27:09 AM Yes, help would be appreciated. I’m feeling lost trying to get this wired and working.
|