Shortest Saber w/MHS Emitter?

[arrScott]

Looking to make a Nagamaki-style saber with a "hidden" second blade. Starting with an Arbiter as the primary hilt, and step two will be to add a much shorter hilt with a coupler. But to make it look the best when used as a single-blade weapon, I'd like to add one of several pommel-looking emitters to the second, shorter hilt, so that the whole hilt will have the appearance of a long handle for  a single blade. Thus my question: What are the shortest US hilts with a removable emitter?

[Infinit01]

Hello there, as far as shortest US hilts, I would have to say the Initiate and Apprentice lines from V3 to V4


https://ultrasabers.com/product/initiate-v4/

https://ultrasabers.com/product/dark-apprentice-v4/

https://ultrasabers.com/product/dark-initiate-v3/

[Karmack]

The V2s won't work, they're not MHS compatible.

I'd look at the Initiate V3/V4 or the Apprentice V4.   But maybe the best match is the Menace, which is short but also has MHS pommel and emitter.

[Infinit01]

The V2s won't work, they're not MHS compatible.

I'd look at the Initiate V3/V4 or the Apprentice V4.   But maybe the best match is the Menace, which is short but also has MHS pommel and emitter.

I forgot for some reason about the V2s.  Point

[Racona Nova]

And you didn't read carefully, Infinit It was about MHS emitters, not pommels And the Apprentice/Initiate line-ups don't have MHS emitters...

So I agree on the Menace, I also think it's the shortest saber with an MHS emitter right now.

[Karmack]

And you didn't read carefully, Infinit It was about MHS emitters, not pommels And the Apprentice/Initiate line-ups don't have MHS emitters...

So I agree on the Menace, I also think it's the shortest saber with an MHS emitter right now.

Yeah, I missed that until after I hit "post" as well.  But the Menace fits the bill.  Its about the only short hilt with an MHS emitter and pommel.

[scifidude79]

After the Menace would probably be the Shock. The body (excluding the emitter and pommel) is just under 8 inches.

[chalion]

If you're talking stock US sabers, i'd agree with the Menace, un-modded, being the shortest.

My Azure Reaper sans claws, with a Consular Emitter is less than 11" long..................

My Archon v3.1 with the Consular emitter on it instead is also less than 11" long. Could even be shorter if I swap pommels with one that's flush, like the EH pommel.

[Dauntless Seven]

Hi.  Having owned both the Menace and Shock I have to say that the Shock hilt/body at just under 7.5 " ( just measured it ) is the best choice.  Also it would be the better compliment for the Arbiter.  Don't have my War Glaive any more but the hilt section if I recall wasn't that long and also would blend in well.  

[Infinit01]

And you didn't read carefully, Infinit It was about MHS emitters, not pommels And the Apprentice/Initiate line-ups don't have MHS emitters...

So I agree on the Menace, I also think it's the shortest saber with an MHS emitter right now.

My bad on that one

Hi.  Having owned both the Menace and Shock I have to say that the Shock hilt/body at just under 7.5 " ( just measured it ) is the best choice.  Also it would be the better compliment for the Arbiter.  Don't have my War Glaive any more but the hilt section if I recall wasn't that long and also would blend in well. 

I agree on the Shock, I have a Dark Shock body and it's pretty short without the emitter and pommel