Few questions

[Broto-Kropot]

ok to start off what exactly is the quick disconnect option when ordering a saber, i opted out of getting it because i didnt know what it was and just seen it as it costing extra for something i might not have needed.

and also how would i go about changing led color for my saber, id like to have a few options to choose from, sure green is nice but maybe 1 day i decide i wanna use blue or purple or maybe even red, would i be able to do this especially with the obsidian board, i guess what im really asking is am i able to interchange led colors, and how would i go about doing it with the consular hilt and obsidian board or would i just be able to buy the LED Module from the store and swap it out

[Warlock Umbra]

Well I can answer both questions at once. The quick disconnect is FOR changing out LEDs! You would have to order other MLS (Modular LED System) unit with the color(s) that you want. These are in the Accessories section. The RGB (Red/Green/Blue) option also lets you have different colors WITHOUT switching out LEDs. There are 4 buttons on the hilt, one for each color and a master switch that controls power to the others. You can mix the colors to get different ones. All together there are seven colors with this option: Red, Green, Blue, Violet Amethyst, Arctic Blue, Yellow, and Silver. Hope this helps! 

[Broto-Kropot]

this is what your talking about right?
http://www.ultrasabers.com/product-p/led%20module.htm

because im about to order it replace what i have, how would i go about installing it, it seems easy looking at it, take out the led in the old module and put it in the new 1

[Warlock Umbra]

Yes, just make sure you get the right one. There are two different ones. It tells you at the bottom of the page on each one, which models they fit in.

[Broto-Kropot]

im glad you caught me before i ordered, i only found the 1 i linked, if there were 2 then there isnt now unless im missing it, ill go back and check again, but i guess i cant use the 1 i linked, This unit currently fits in the Aeon, All Prophecy Models, All Initiate v2 Models, All Dominix v2 Models, All Liberator Models, All Standard Issue Models, and the Redemption.

no consular i guess im outta luck on that 1, i found the other 1 but that 1 doesnt list the consular either so i guess im not doing it lol, ehh i dunno it has me confused

[Warlock Umbra]

I would email them about that. I'm not sure which one the Consular takes. 

[Ultra]

I would email them about that. I'm not sure which one the Consular takes. 

It takes the MLS unit:

http://www.ultrasabers.com/product-p/mls.htm

[Warlock Umbra]

It takes the MLS unit:

http://www.ultrasabers.com/product-p/mls.htm

Thanks Ultra! That's what I thought, but didn't want give the wrong information.