Click here for lightsabers
  • Home
  • Help
  • Login
  • Register
Pages: [1]   Go Down
Author Topic: A/V Problems- Please Help!  (Read 1141 times)
Force Sensitive

Force Alignment: 0
Posts: 2

« on: July 21, 2019, 06:59:21 PM »

I just received my first US- It's AWESOME! I bought a Archon v3.1 with an illuminated A/V switch and Emerald driver. The switch worked great at first- turn the saber on and the A/V switch would say lite and flicker with Flash on Clash. Now, when you turn the saber on, it does not illuminate. Only when Flash on Clash is engaged will it light(flicker). This started after I connected my saber to the computer to play around with the Emerald driver. Is there a setting on the driver for the A/V switch? Did I change a setting by accident?
Please let me know how to get the A/V switch to light when the saber is "on".

Any advise is appreciated!


« Reply #1 on: July 22, 2019, 09:28:09 AM »

I am sorry to hear that this has happened. The AV switch is powered by channel 4 or the White/Amber LED, so it has to be at 100% to power the AV switch. If that doesn't fix it, I recommend contacting customer service at

Racona Nova
Knight of the Obsidian Order
Knight Commander

Force Alignment: 1114
Posts: 4763

There is no good or evil....there's only power!

« Reply #2 on: July 23, 2019, 12:23:54 PM »

^ This. Check the settings in the Emerald Driver, that should solve your problem.

Sig by Master Nero
Phantasm v3 LE (Obs v3) - AB w/ FoC AS---Manticore (Obs v3) - BR w/ FoC AS (QD)---Archon v2.1 (Obs v3) - RGBW Emerald

Pages: [1]   Go Up
Send this topic | Print
Jump to: