Click here for lightsabers
  • Home
  • Help
  • Login
  • Register
Pages: [1]   Go Down
Author Topic: Crystal Chamber for Manticore  (Read 4037 times)
Swardheld
Knight Ensign
*

Force Alignment: 53
Posts: 164
« on: August 03, 2013, 08:41:34 PM »
Hi All

This mod was pretty simple to do, the hardest part was trying to avoid inhaling the blue-cap Crazy glue - man that stuff is toxic!

First the crystal:

Not exactly sure where it originally came from... I found it one day when I cleaned under the couch. I suspect the cats must have destroyed a Christmas ornament and that was one of the pieces they hid. It looks like a crystal, but it's just hard plastic.

Second is an UltraSabers blade plug:


This is the picture of the two things glued together:


I just used a tiny amount of glue at the edge and held the crystal on for a minute or two.

Here is the crystal chamber in the Manticore:


You can see the Manticore emitter is also sporting a couple of 1.25 inch O-rings.

Here is the lit saber:


I took a lot of pictures, but the light is so bright, you couldn't see the chamber in the pictures, so I finally went high shutter speed to be able to get this shot so you'd be able to see the lit crystal.
Logged
GB Phantasm (2xInitiate V3 LE), RGB Raven, RGB Dark War Glaive, CG Dominix V3, DVA Archon V2, BR Dark Shock, CG Manticore, CG Dark Liberator V3, SY Graflex CE, AS Prophecy V3, AB Initiate V2, Em Chosen One, TCG Lost Grey, Diamond Menace CE pair, TCG Fulcrum, TGB Archon V3, VA Electrum Wind, Diamond Dominicide

Hibyrd
Knight Officer
*

Force Alignment: 37
Posts: 148
« Reply #1 on: August 04, 2013, 12:47:20 PM »
Nice job! That looks sweet. I didn't realize the emitter on the manticore was longer than the blade plug. Good eye!
Logged
Bellicose RGB
Archon V2.1 CG Obsidian w/Foc Orange
Malice BR Obsidian w/Foc Orange
Prophecy CE V2 BR
Liberator AB
Dark Standard Issue Staff GB
Dominix v2 LE FO
Manticore Emerald RGBW
Dominix v2 AS
Crimson Reaper AB Obsisian w/FOC silver
Initiate

Musenda
Knight Apprentice
*

Force Alignment: -14
Posts: 32
« Reply #2 on: October 30, 2013, 07:34:41 AM »
An easy mod that looks nice and doesn't risk the actual saber?
That's a point.  Grin
Logged

Zren Tobas
Knight Commander
OVER 9000!!
*********

Force Alignment: -2080
Posts: 14908


[Give Light Side Points!] [Give Dark Side Points!]
« Reply #3 on: October 31, 2013, 01:22:23 AM »
This would be a pretty sweet blade plug actually. I might even do this. Just take out the aluminum cap then replace it with a crystal.
Logged
Sabers: Liberator V3 CG ObsV4 sound!, Graflex GB, Overlord AB, Crimson Savior BR, Bane PO, Dark Initiate V2 LE BH, Shock GB, Archon V2.1 CG, Dark Sentinel LE GB ObSLite!, Standard Issue V3 CG, Dominix V3 LE BR, Sentinel SRD, Dominix V2 FO, Exile CG

[/url]SW1 by joshgarcia07[/url

Racona Nova
Knight of the Obsidian Order
SaberForum.Com Moderator
Knight Commander
*****

Force Alignment: 1116
Posts: 4771


There is no good or evil....there's only power!
« Reply #4 on: October 31, 2013, 07:23:30 PM »
I think you actually don't have to take the cap out - just glue the crystal the way shown in the pics so that the crystal tip (the narrow part) points upwards. Then you can use it like a normal blade plug.
Logged
Sig by Master Nero
Phantasm v3 LE (Obs v3) - AB w/ FoC AS---Manticore (Obs v3) - BR w/ FoC AS (QD)---Archon v2.1 (Obs v3) - RGBW Emerald

RKHCarter
Knight Lance Corporal
*

Force Alignment: 5
Posts: 55
« Reply #5 on: November 01, 2013, 12:57:56 AM »
this is just made of awesome and a PERFECT use of emitter windows!
Logged
Light... side?
Dark... side?
Have sides nature does not...

Pages: [1]   Go Up
Send this topic | Print
Jump to: