a few people have asked me about the emitter on my saber, well i guess its time i let you in on my secret, if you have seen my other custom post in the general gallery, you would see that it is an Obi-Wan ROTS modded with consular emitter, well that very same saber is what supplied the emitter for the custom consular i have shown you in this post, now the rots emitter itself didnt fit onto the consular because you have to screw it in for 1 so you needed a double male extension, and i happened to have 1 from tcss
http://www.ultrasabers.com/Double-male-with-slots-P397.aspx i screwed it into place and tried to screw in the emitter, but it was a no go, so i had a friend of mine who is skilled with metal working mod up the emitter to make it fit and he did an outstanding job on it because it screwed right in place, i even left the little rubber piece inside the emitter in it and he drilled me a new retention hole to hold the blade in place firmly.
now if your wondering about the obi-wan and how i got the consular hilt on it, well thats easier, no modification necessary, all you needed was this from tcss
http://www.ultrasabers.com/12-Double-Female-P398.aspx just slide it over the blade it screws to the fx saber perfectly, then slide the consular emitter over the blade and into the double female extension and BAM custom obi rots, that was alot easier to do then the consular lemme tell ya
