Ultraproffie Lite color values?

[Dark Lord of the Moo]

I got in the last sale a saber with the Ultraproffie Lite in it. I've got the SD card out and I'm trying to set a color, but the settings editor at ultraproffie.com seems to use a 0-32767 color set with no demarcation of what each value is. Is there any kind of way to correlate the colors to any chart or anything without cycling through them all (which would take forever)? Searching the forums didn't find anything, and all I found on the web was the proffie site (tge ibe at fredrik.hubbe.net) which uses a different value scheme from what I can tell. Also checked the documentation but didn't see anything in there about it.
Thanks in advance for any clues!

[nunya]

Eww that is nasty. 
Typically the upper and lower bounds are full on one of the three colors.
This looks like 16 bit digit with one bit reserved so 2^15.
17476 should be all colors at equal level or 125 r,g,b
There has to be datasheet for the board...

[nunya]

Using a binary to decimal converter i have some numbers you can try:
120 - 000000001111000
1920 - 000011110000000
30720 - 111100000000000
15 - 000000000001111
240 - 000000011110000
3840 - 0001111000000000
32512 - 111111100000000
28687 - 11100000001111
28912 - 111000011110000
I am using 4bit grouping and guessing what the extra 3 are doing and where they need to be (i.e. beginning or end)
I could be way off on this but it is where i would start.

If you can change to a solid color then check what is set in the card files, you can use the converter to get a good guess.